Slasher stripes question?

Reply Subscribe

Thread Tools

Aug 2, 2014 | 05:01 PM

#1 (permalink)

Erikki7

Thread Starter

Joined: Jun 2010

Posts: 12

Likes: 0

Slasher stripes question?

I decided to make my own slasher and I am wondering if the stripes selling by CICCI are printed or only colored vinyl stripes with two narrower stripes overlaping the larger one?

Aug 2, 2014 | 05:38 PM

#2 (permalink)

Mrmiata

Senior Member

Joined: Sep 2011

Posts: 9,595

Likes: 26

From: Kellyville, Ok

Re: Slasher stripes question?

Basically 3 stripes per stripe..1 large and 2 small ones

Aug 2, 2014 | 05:51 PM

#3 (permalink)

vinnys

Forum Regular

Joined: Jun 2012

Posts: 335

Likes: 0

From: USA

Re: Slasher stripes question?

Do you know the width of these? Measured across, not on the angle. Thanks

Aug 2, 2014 | 08:26 PM

#4 (permalink)

Mrmiata

Senior Member

Joined: Sep 2011

Posts: 9,595

Likes: 26

From: Kellyville, Ok

Re: Slasher stripes question?

At the lake right now.. can give you an answer tomorrow evening if no one else jumps in..

Aug 2, 2014 | 08:43 PM

#5 (permalink)

Red Runner

Joined: Feb 2014

Posts: 207

Likes: 7

From: Fresno, CA

Re: Slasher stripes question?

I don't know what the CCCI format is. I used some hobby shop TrimKote 5" wide with 2" wide stripes spaced 1/4" 2" 1/2" 2" 1/4".
The angle should match the seam for the door.

CrossfireForum.org - Red Runner's Album: Slasher Strips - Picture

Last edited by Red Runner; Aug 2, 2014 at 08:50 PM.