HELP! - No Remote Turn on from Scosche Harness
HELP! - No Remote Turn on from Scosche Harness
I followed the below thread and purchased the Scosche wiring harness. After connecting up the lead to the new Alpine harness, I noticed there is no blue remote turn on wire on the Scosche harness. So, now it won't turn on the factory amdp and I get no sound. I called Crutchfield and they said I have to run the speakers and everything directly into the factory amp. It doesn't seem right since I just need to tap into the factory amp turn on lead. Does anyone know what color wire that is? Thanks.
https://www.crossfireforum.org/forum...=back+speakers
https://www.crossfireforum.org/forum...=back+speakers
Re: HELP! - No Remote Turn on from Scosche Harness
When I got the harness in that thread, there was a remote turn on wire in the bag, that was not pushed into the harness yet, it was just loose. It came with a note about hooking it up. Since didn't have a factory amp and installed my own amp, i ran the remote turn on wire staright from the deck.
I would check the harness bag if you still have it to make sure it wasn't lose inside of it.
I would check the harness bag if you still have it to make sure it wasn't lose inside of it.
Re: HELP! - No Remote Turn on from Scosche Harness
Originally Posted by jspies
When I got the harness in that thread, there was a remote turn on wire in the bag, that was not pushed into the harness yet, it was just loose. It came with a note about hooking it up. Since didn't have a factory amp and installed my own amp, i ran the remote turn on wire staright from the deck.
I would check the harness bag if you still have it to make sure it wasn't lose inside of it.
I would check the harness bag if you still have it to make sure it wasn't lose inside of it.
Anyone else have had this issue?
Re: HELP! - No Remote Turn on from Scosche Harness
I had the same problem. If you bought it from Crutchfield like me, then you probably got their crappy instructions. It says the pink wire is only used if you have some old Audi or something. It's the remote wire. I just did my install a couple weeks ago and I had to go back and wire it in.
Hope that helps. There was a red/white wire that I didn't use at all.
Hope that helps. There was a red/white wire that I didn't use at all.
Re: HELP! - No Remote Turn on from Scosche Harness
Originally Posted by JonZoidberg
I had the same problem. If you bought it from Crutchfield like me, then you probably got their crappy instructions. It says the pink wire is only used if you have some old Audi or something. It's the remote wire. I just did my install a couple weeks ago and I had to go back and wire it in.
Hope that helps. There was a red/white wire that I didn't use at all.
Hope that helps. There was a red/white wire that I didn't use at all.
Join Date: Jun 2006
Location: Auburn Hills, Michigan
Age: 34
Posts: 1,435
Likes: 0
Received 2 Likes
on
2 Posts
Thread
Thread Starter
Forum
Replies
Last Post
2005 Ragtop
Wheels, Brakes, Tires and Suspension
7
10-03-2015 03:01 PM
Selbyl
WTB - Items/Parts Wanted to Buy - Archive
2
09-26-2015 04:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)