Does anyone know the correct part # for a 2006 infinity radio amp?
I am over a 100 miles from the car. I don't know if it is a loose connection or a bad amp. I may be need to replace the unit. I will be able to look at the car next weekend.
I know it is not my radio or speaker " for sure "
Radio plays sometimes but most of the time does not play.
Thanks

 

Don't buy anything until you have determined your problem. The amp Chrysler #5189332AA new cost $422. You can find a good used one on this web site in the "Market Place" section for less.
P.S. It is best if you reply in your original thread. Keeping everything in one thread helps us help you as all the info is much easier to follow.

 

Also, the Infinity amp is not mandatory.
With a bit of creative wiring, any good aftermarket amp will work.

 

O K, I will do that in the future. Thanks for your help.

 

Thanks for that info. I am going to have it checked out this weekend.

 

Take this with you when you have it checked out :

 

Thank You so much for this information.

 

I made a copy and sure will take it with. me.
Thanks again.

 

BEFORE YOU take your car any where check the fuses # 8 for the radio, and #23 for the amp in the fuse box under the hood on the drivers side. Also check with a code reader if you have any DTC Diagnostic Trouble Codes. Many items use the same grounds as the radio and amp it may help identify where your problem is if there are related DTC.

 

I sure appreciate your help. I will check the fuses and see if a friend has a DTC tool.
Thanks again

 

I did check the fuse all good. Then bought a like new factory radio from a forum member, it works great. Then I found on ebay the same Amplifier that was in my Crossfire and installed it over the weekend. Now, radio and CD player work fine. Yea!!!
Again , I want to Thank You all you guys for the info and help on the forum.

 

Thanks for reporting back !!!!!
I try to help, and zip439 is a fart smucker also.