I've just gotten my cargo cover in. What do the bolts screw into? I'm hoping it's not styrofoam. I'm just afraid to cut to find out. So those of you who have installed this already, can you give me some pointers because the instructions aren't helping much.

Thanks in advance.

 

13Dog,

What did you pay for it? I would like to get one, but the dealer charges WAY too much, imo.

 

X-mas gift, no clue.

 

Ok, I've kinda answered one of my questions, but I'm going to add this to help anyone else.

https://www.crossfireforum.org/forum...ht=cargo+cover

 

Dog, it's pre-threaded under the carpet and padding. It mounts very securely. I would recommend using an ice pick, or something similar, to find the exact location with the template and then cut just enough carpet away to expose the threaded hole for the bolt. The hardest part is installing the support brackets to the back of the tail lights but goes pretty easy if you take your time. Good luck.

 

I just installed the cargo cover. It's pre-threaded behind the carpeted area where it tells you to cut. I just cut a hole big enough so the whole bolt assembly goes through the carpet and not on top of the carpet. I think it's actually kinda scary to cut my car up and drill, but if you follow the included instructions exactly it should be no problem. The whole thing took me about an hour.