Crossfire Coupe A place to discuss Coupe specific topics.
Sponsored by:
Sponsored by: CARiD

Oklahoma City

Thread Tools
 
Old Jul 27, 2009 | 09:26 PM
  #1 (permalink)  
racehorse's Avatar
Thread Starter
Joined: May 2009
Posts: 196
Likes: 0
From: Thomas, Oklahoma
Unhappy Oklahoma City

Are there any Crossfire owners in or near OK City that visit this Forum I'm trying to find an owner that can refer me to a shop that can work on our cars or does his own. I have mods that I would like done but am not mechanically inclined.
Thanks for any replies.
 
Reply
Old Jul 27, 2009 | 11:14 PM
  #2 (permalink)  
joejet's Avatar
Forum Regular
Joined: Mar 2008
Posts: 567
Likes: 0
From: Oklahoma City
Default Re: Oklahoma City

Racehorse,
Nice to have another Okie on board. There a couple of us in OKC area that are on here quite a bit. Terry from Yukon,Jon from Moore,and me Joejet from OKC west side of Lake Hefner. We get together every once in a while for a cruise, maybe you could join us.
I don't know of any shops that install mods around here. I'm sure Jon or Terry will let you know if they have found any.
By the way,we are going down to the Texas Motor Speedway to run our cars around the track with about 25 other Crossfires on Sept.26. Come join us. Only costs $30. We did it back in May and had a ball.
Keep in touch.
For regular repairs Bob Moore Chrysler on NW Expressway.
Joejet
2007 Black coupe std.
 
Reply
Old Jul 28, 2009 | 12:38 AM
  #3 (permalink)  
SRT6nTulsa's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,280
Likes: 2
From: Albuquerque, NM
Default Re: Oklahoma City

If you don't mind going to Tulsa, I know a guy.
 
Reply
Old Jul 28, 2009 | 08:26 AM
  #4 (permalink)  
OKC-XFR's Avatar
Forum Regular
Joined: May 2008
Posts: 750
Likes: 1
From: Moore, OK
Default Re: Oklahoma City

Welcome, Racehorse - it's good to have another Oklahoman with us! I have only had my Crossfire in the shop once, and that was for warranty work - I agree with Joe, Bob Moore did an excellent job and treated my baby very well. Sorry, any other work has been done in my garage, so I can't help you with a shop recommendation. It's not a bad little drive to Tulsa to get work done, though.
 
Reply
Old Jul 28, 2009 | 08:27 AM
  #5 (permalink)  
smfrycruzr's Avatar
Senior Member
Joined: Nov 2008
Posts: 1,312
Likes: 12
Default Re: Oklahoma City

Hello Racehorse, I'm out in Yukon, and I've got an indie that works on all makes of European cars, including our XFires. Name of the shop is Ranchwood Auto, owners name is Ryan. Give him a call, he's a good guy.
Later, Smfrycruzr
 
Reply
Old Jul 28, 2009 | 11:43 AM
  #6 (permalink)  
racehorse's Avatar
Thread Starter
Joined: May 2009
Posts: 196
Likes: 0
From: Thomas, Oklahoma
Default Re: Oklahoma City

Thanks guys for the welcome!! I will give the guy from Ranchwood Auto a call. I will also keep Tulsa in mind, always enjoy eating at Spudders. Joejet where do I find the agenda for going on the ride to Texas Motor Speedway, sounds like a blast Thanks again guys look forward to meeting y'all.
Racehorse
 
Reply
Old Jul 28, 2009 | 11:44 PM
  #7 (permalink)  
joejet's Avatar
Forum Regular
Joined: Mar 2008
Posts: 567
Likes: 0
From: Oklahoma City
Default Re: Oklahoma City

Racehorse,
Search "Running of the Crossfires" and you will find all info on our Texas Speedway fun. I hope you can join us. I'm going,along with OKC-XFR, Terry from Yukon, Tdaner, and I think Alex from Tulsa. I think we will meet and drive down together. Let me know. The date is Sept 26.
I see you are a "Horseman" let me know when you are at Remington Park and we can meet.

It is now post time
Joejet
 
Reply
Old Jul 29, 2009 | 12:21 PM
  #8 (permalink)  
tdannar's Avatar
Joined: Jun 2008
Posts: 371
Likes: 1
From: Sand Springs, Ok
Default Re: Oklahoma City

Originally Posted by racehorse
..............where do I find the agenda for going on the ride to Texas Motor Speedway, sounds like a blast ............Racehorse
https://www.crossfireforum.org/forum...sept-26th.html
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kodebuster
Wheels, Brakes, Tires and Suspension
12
Nov 5, 2020 04:06 PM
rampntlion
Engine, Exhaust, Transmission and Differential
21
Feb 11, 2019 08:18 AM
Franc Rauscher
General
2
Aug 3, 2015 06:20 PM
cjfine
Parts/Accessories for sale - Archive
0
Jul 20, 2015 11:58 PM
waldig
All Crossfires
7
Jul 20, 2015 08:10 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 03:56 AM.