Cheap Cupholder ($10) for Autostick and Non-Smoker
Last edited by Grumps; Oct 1, 2014 at 08:40 PM.
The only thing that bothers me is, if there is an open topped drink in there, there is the possibilty of spilling onto the console. Also, condensation drip from very cold containers. Other than that the search goes on!
I use the wedge style that wedges between the console and passenger seat. Of course this narrows the seating area for your passenger, but works great and has no holes in bottom to leak. It holds two drinks and has a center section for holding things. Just my $.02
EDIT: Welcome to the forum, and enjoy the ride
I use the wedge style that wedges between the console and passenger seat. Of course this narrows the seating area for your passenger, but works great and has no holes in bottom to leak. It holds two drinks and has a center section for holding things. Just my $.02
EDIT: Welcome to the forum, and enjoy the ride
Originally Posted by IBLUBYU
The only thing that bothers me is, if there is an open topped drink in there, there is the possibilty of spilling onto the console. Also, condensation drip from very cold containers. Other than that the search goes on!
I use the wedge style that wedges between the console and passenger seat. Of course this narrows the seating area for your passenger, but works great and has no holes in bottom to leak. It holds two drinks and has a center section for holding things. Just my $.02
EDIT: Welcome to the forum, and enjoy the ride
I use the wedge style that wedges between the console and passenger seat. Of course this narrows the seating area for your passenger, but works great and has no holes in bottom to leak. It holds two drinks and has a center section for holding things. Just my $.02
EDIT: Welcome to the forum, and enjoy the ride
Minimal pressure on ashtray and bottom has absorbent cushion with lip to hold condensation. Most of my driving is with a bottle of water or coffee cup with lid. Not for everyone but works for me just fine.
Originally Posted by Grumps
Minimal pressure on ashtray and bottom has absorbent cushion with lip to hold condensation. Most of my driving is with a bottle of water or coffee cup with lid. Not for everyone but works for me just fine.
that's the most important thing ..... that it works for you ....
Hi Grumps,
Just discovered your photos of the drink holder and was so impressed with your so9lution that I went out and sourced an identical unit this evening for our roadster.
Just one problem... I can't figure out how you attached and secured your holder to the ashtray. The metal clips included with the holder don't seem to be appropriate.
Can you kindly share your install method with us, so we too can enjoy a cold drink while motoring on a hot, sunny afternoon?
Many thanks in advance!!!
Glenn
dr.glennmccormack@sympatico.ca
nala125
Just discovered your photos of the drink holder and was so impressed with your so9lution that I went out and sourced an identical unit this evening for our roadster.
Just one problem... I can't figure out how you attached and secured your holder to the ashtray. The metal clips included with the holder don't seem to be appropriate.
Can you kindly share your install method with us, so we too can enjoy a cold drink while motoring on a hot, sunny afternoon?
Many thanks in advance!!!
Glenn
dr.glennmccormack@sympatico.ca
nala125
A guy I work with spilled his coffee into the shifter of his mercedes from the cup holder and caused a short and electrical damage to the transmission. major bucks to fix. I would never have a drink that close to my shifter. Just my .02.
Thanks for the advice! Point taken. We never allow OPEN beverages in the drink holder. Just bottled water of coffee in a secure stainless container. And... we're very careful.
Thanks again.
nala125
Thanks again.
nala125
Originally Posted by cajunxfire
A guy I work with spilled his coffee into the shifter of his mercedes from the cup holder and caused a short and electrical damage to the transmission. major bucks to fix. I would never have a drink that close to my shifter. Just my .02.
Thread
Thread Starter
Forum
Replies
Last Post
Selbyl
WTB - Items/Parts Wanted to Buy - Archive
2
Sep 26, 2015 04:15 AM
tritongreen
Troubleshooting & Technical Questions & Modifications
0
Sep 18, 2015 07:32 AM
LE Cross
Parts/Accessories for sale - Archive
2
Aug 24, 2015 07:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




