Aluminum Intake Manifolds for srt6
Senior Member
Joined: Dec 2006
Posts: 2,881
Likes: 3
Re: Aluminum Intake Manifolds for srt6
Originally Posted by JeremyAnderson
A co-worked set the band saw on fire at work while trimming several mag bellhousings. That was interesting. I always enjoyed setting fist sized ***** of mag shavings on fire with my propane torch, than spraying water on it. Really cool stuff!
I just cut a few shavings off of the plenums, they wouldn't burn. As a matter of fact, why haven't the plenums turned black from oxidization like every other un-protected mag part that I've seen?
Hmmmmmm........
I just cut a few shavings off of the plenums, they wouldn't burn. As a matter of fact, why haven't the plenums turned black from oxidization like every other un-protected mag part that I've seen?
Hmmmmmm........
Senior Member
Joined: May 2004
Posts: 4,094
Likes: 8
From: Charleston, SC
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Re: Aluminum Intake Manifolds for srt6
i should have the latest version of these done shortly, i want to make sure there perfect before i spill all the beans, btw this wil be the 4th revision of them
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Re: Aluminum Intake Manifolds for srt6
Originally Posted by davesrt6
updates???
Senior Member
Joined: Jun 2006
Posts: 1,613
Likes: 1
From: Lakeville, MN/ River Falls, WI
Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
the new revision of the boxes are done and bolted onto our spare motor, i just need to weld in the tubes from the air distributor, i should have them running on our car w/in a week to test out
Senior Member
Joined: Nov 2007
Posts: 1,225
Likes: 0
Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
the new revision of the boxes are done and bolted onto our spare motor, i just need to weld in the tubes from the air distributor, i should have them running on our car w/in a week to test out
I hope you went with the purpose built staggered design.
Senior Member
Joined: Sep 2006
Posts: 1,717
Likes: 4
From: New Jersey
Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
the new revision of the boxes are done and bolted onto our spare motor, i just need to weld in the tubes from the air distributor, i should have them running on our car w/in a week to test out
Re: Aluminum Intake Manifolds for srt6
I also still interested in this Mod! Keep us updated....
Re: Aluminum Intake Manifolds for srt6
Re: Aluminum Intake Manifolds for srt6
Originally Posted by SRT6nTulsa
Has anyone called dibs on the first set of intake manifolds????
What do these manifold covers do..? The air is compressed at that point in the intake system - changing diameters won't offer any gains or I'm sure NW would have posted a dyno results by now...
The folks on the MB forums have been tuning and making mods for these engines for years and years before 2005.
I like search their boards to see what can be done...
Last edited by BrianBrave; Mar 8, 2008 at 05:15 PM.
Senior Member
Joined: Aug 2007
Posts: 2,280
Likes: 2
From: Albuquerque, NM
Re: Aluminum Intake Manifolds for srt6
Originally Posted by BrianBrave
Step up and be first.
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Re: Aluminum Intake Manifolds for srt6
the manifolds have not been run on our car yet, we should have them on the car w/in a few days and will let you guys know how they work out. im sorry i dotn have a price for you guys yet as we still have not completed the project
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Re: Aluminum Intake Manifolds for srt6
WOW, i just took the car for a spin with them installed, ill have to get ti on a dyno asap! i took the car out this morning with the gtec to get my baselines, and again for the test drive with the mani' installed, GREAT improvement, ill keep the numbers to mysef until we get the real dyno sheet but right now im very happy. this project will go forth!
When are you planning to dyno?
