Crossfire SRT6 A place to discuss SRT-6 specific topics.

I need your advice quickly

Thread Tools
 
Old Jan 23, 2009 | 05:16 PM
  #1 (permalink)  
amx1397's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 6,702
Likes: 435
From: Indialantic Fl./blairsville Ga
Default I need your advice quickly

I have been offered a throttle body from a E55, i know i have to get the part that goes on the SC that the throttle body bolts to this i am told will make it fit,, will the electronics work the same and is it worth 250.00 thanks in advance jim
 
Reply
Old Jan 23, 2009 | 05:18 PM
  #2 (permalink)  
waldig's Avatar
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Re: I need your advice quickly

What is the gain that you are expecting?

Woody Enjoy
 
Reply
Old Jan 23, 2009 | 05:25 PM
  #3 (permalink)  
REVIT93RX7's Avatar
Forum Regular
Joined: Oct 2007
Posts: 372
Likes: 1
From: Florida
Default Re: I need your advice quickly

Would need to look at the specs of each to determine if the electronics would work. Can't make any assumptions in this case.
 
Reply
Old Jan 23, 2009 | 05:25 PM
  #4 (permalink)  
amx1397's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 6,702
Likes: 435
From: Indialantic Fl./blairsville Ga
Default Re: I need your advice quickly

i don't know I also don't know what size the stock xrossfire srt-6 theottle body is. i was just offered it and told the guy i would get back to himm ,I am still learning this car jim
 
Reply
Old Jan 23, 2009 | 05:41 PM
  #5 (permalink)  
GDC-SRT's Avatar
Senior Member
Joined: Dec 2007
Posts: 1,366
Likes: 1
From: Mn
Default Re: I need your advice quickly

I think the e55 has a 72mm stock, not sure what the 6 has, Gains would probably be minor
 
Reply
Old Jan 23, 2009 | 07:13 PM
  #6 (permalink)  
GatorLCA's Avatar
Senior Member
Joined: Dec 2006
Posts: 1,339
Likes: 0
From: Sarasota, FL
Default Re: I need your advice quickly

Never know, it depends on the year E55. In the SL55's the first couple years were 72mm but toward the later years (before the new model), I believe 06+ maybe 07, the SL55 TB's were 80mm.

Only get it if it's the 80mm TB, otherwise I don't think it's worth the time to make it fit

Got this from the MBWorld site, from Vadim @ VRP

Early C32 TBs can be bored out from 74 mm to 76 mm. IMHO, on C32 that would probably be worth 5-10RWHP. Going with 80 mm TB will work and will add another 5-10RWHP.
 

Last edited by GatorLCA; Jan 23, 2009 at 07:17 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
franklindm
Troubleshooting & Technical Questions & Modifications
12
Mar 14, 2020 12:23 PM
aerobluehal1
Canada
19
Oct 13, 2018 09:47 AM
Selbyl
Audio, Video and Electronics
0
Sep 22, 2015 10:41 PM
xjken
All Crossfires
9
Sep 13, 2015 10:18 PM
davidc90
Troubleshooting & Technical Questions & Modifications
2
Sep 6, 2015 10:37 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 11:58 AM.