Crossfire SRT6 A place to discuss SRT-6 specific topics.

Selectable Sprint Booster testing

Thread Tools
 
Old Oct 3, 2010 | 04:48 PM
  #1 (permalink)  
waldig's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Selectable Sprint Booster testing

I installed my new sprint booster to see how it goes.

I did the throttle reset before testing the settings. The positions are light off, low I believe, Green light, Medium, and red for high. I was not able to see much of a difference and can not give any results at this point.

From a roll at 3500rpm in first, I was able to blow off the tires and chirp second easily. This was the same in all three settings and back and forth I had similar kick *** response.

When I got my first TB it was night and day difference but it was not switchable so you had to pull the pedal to swap it in and out. Thats a long process and the checking between in or out is hard to compare but it was significantly better.

I will have to test it on the autocross track next week to see if I can see a difference. What I have to find out is what is the difference in the settings ---- is the dark off or regular sprint booster??

I dont think there is any problems with the booster, I just have to evaluate it under better circumstances. My car has mucho torque at the bottom of the rev range and opening the pedal it will leap forward. More when I can determine something. BTW I drove it 200 + miles today without any issues.

Woody
 
Reply
Old Oct 3, 2010 | 05:02 PM
  #2 (permalink)  
BLACKSRT-6's Avatar
Senior Member
Joined: Jun 2007
Posts: 957
Likes: 0
Default Re: Selectable Sprint Booster testing

What class do you run at autocross and where is the event next Saturday? Thanks
 
Reply
Old Oct 3, 2010 | 06:29 PM
  #3 (permalink)  
waldig's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Re: Selectable Sprint Booster testing

The car is not classes in CDC and we are simply timed, a lot like the fun runs as there are no tech rules, just safety. Run is at Bowie stadium in PG county, will you be there.

Woody
 
Reply
Old Oct 3, 2010 | 06:34 PM
  #4 (permalink)  
BLACKSRT-6's Avatar
Senior Member
Joined: Jun 2007
Posts: 957
Likes: 0
Default Re: Selectable Sprint Booster testing

Thinking that I would, if the weather is decent. Prince George VA near Petersburg?
 
Reply
Old Oct 3, 2010 | 07:46 PM
  #5 (permalink)  
waldig's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Re: Selectable Sprint Booster testing

THink about 2 oclock on the 495 beltway. Its above the center of the circle on the eastern side of 495.Woody
 
Reply
Old Oct 3, 2010 | 08:43 PM
  #6 (permalink)  
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: Selectable Sprint Booster testing

Woody, Dark or(no light) = stock setting(SB off). You want red for race, green for going to the grocery store. I hope you see improvement at your next autocross run. Bob
 

Last edited by dinasrt; Oct 3, 2010 at 08:49 PM.
Reply
Old Oct 9, 2010 | 07:05 PM
  #7 (permalink)  
taz2005's Avatar
Joined: Oct 2009
Posts: 49
Likes: 2
From: Allen, Texas
Default Re: Selectable Sprint Booster testing

Just put the new Selectable Sprint Booster in my SRT6. WOW!!!! Turned off the traction control, but it on RED and I think my PERMAGRIN WILL NEVER GO AWAY.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TerryR
Cars For Sale - Archive
13
Dec 13, 2019 03:27 PM
rmcdaniel12
Crossfire SRT6
41
Nov 4, 2015 04:08 PM
Reliableron
Crossfire Roadster
11
Oct 17, 2015 10:19 PM
Sweet2002
Crossfire SRT6
1
Sep 28, 2015 07:40 PM
tritongreen
Troubleshooting & Technical Questions & Modifications
0
Sep 18, 2015 07:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 02:37 AM.