Crossfire SRT6 A place to discuss SRT-6 specific topics.

thanks Rudy great job, 3.27 works

Thread Tools
 
Old May 21, 2013 | 10:26 AM
  #1 (permalink)  
amx1397's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 454
From: Indialantic Fl./blairsville Ga
Default thanks Rudy great job, 3.27 works

As most of you know, I recently changed my differential ratio, from 3.07 to 3.27. after having lots of trouble with the tcm and the tranny,,,, Rudy, ( the builder of my car) send me a tcm, that actually worked, and did not cause my transmission to slip between second and third,(that tranny is now toast) because of that , I had to rebuild (replace) my transmission, and replace the TCM with a new one from Rudy, and I am now running the 3.27 gears, There is no more limp mode, there is no more slipping between second and third., there is no more problems whatsoever with the transmission or the TCU, (track time) First pass was 11.044 @ 127mph.And that was with the IAT's around 130. Backed that up with 11.49 @ 126 mph
I cannot reveal to you the new transmission used or what was done internally, but I can tell you there's a lot of work and a whole bunch of extra clutches. I can also tell you, externally there is a small mod to be made so that it fits in the car.
The transmission gears,,, first ,second ,third ,fourth, and fifth are the same as the original srt6 tranny ,when the V8 was installed we used the SL55 transmission ,also same as the E55 tranny. jim

example
The limited has the smallest amount of clutches
the srt6 has more than the limited but less than the sl,or E55
the transmission that Rudy used has more clutches and is better than all the above
 
Reply
Old May 21, 2013 | 10:36 AM
  #2 (permalink)  
The Beep's Avatar
Senior Member
Joined: Jul 2008
Posts: 1,220
Likes: 0
From: KINGWOOD TEXAS!
Default Re: thanks Rudy great job, 3.27 works

That's the fastest 1/4 mile pass I've seen so far.
Would love to find a TCU tune that wouldn't put any expensive parts at risk.
 
Reply
Old May 21, 2013 | 08:27 PM
  #3 (permalink)  
rcompart's Avatar
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 24
From: Chicago, IL
Default Re: thanks Rudy great job, 3.27 works

Thanks for the kind words Jim. The trans is built like a brick **** house and should take all the punishment you can throw at it. Between that, the modified valve body, blue tops and the TCU software upgrade, it shifts is very pronounced and firm at WOT but isn't too harsh while just driving around town.

I'd like to clarify though that the gear change TCU and trans software upgrade was handled by Marcin at Speedriven and I'm very happy with how it performs.

Also, have to say I had a blast while we were down there and ripping your car down the track was a truly unique experience I will dream about for a good long while. Looking forward to getting down there again soon and getting you into the tens!
 
Reply
Old May 21, 2013 | 08:29 PM
  #4 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,607
Likes: 38
From: IN
Default Re: thanks Rudy great job, 3.27 works

Nice work Rudy....you and Speedriven are making some nice progress in the tranny area....
 
Reply
Old May 21, 2013 | 08:39 PM
  #5 (permalink)  
grip grip's Avatar
Senior Member
Joined: Mar 2011
Posts: 3,906
Likes: 15
From: TN
Default Re: thanks Rudy great job, 3.27 works

Nice job, guys!!!!!
 
Reply
Old May 21, 2013 | 09:02 PM
  #6 (permalink)  
velociabstract's Avatar
Senior Member
Joined: Jul 2008
Posts: 4,525
Likes: 29
From: Puerto Rico
Default Re: thanks Rudy great job, 3.27 works

Rudy, do you speak any spanish?

Les
 
Reply
Old May 21, 2013 | 09:05 PM
  #7 (permalink)  
Beaner's Avatar
Senior Member
Joined: Aug 2008
Posts: 3,175
Likes: 16
From: Niagara Falls, Ontario, Canada
Default Re: thanks Rudy great job, 3.27 works

Originally Posted by velociabstract
Rudy, do you speak any spanish?

Les
I know he speaks Gibberish
 
Reply
Old May 22, 2013 | 03:59 PM
  #8 (permalink)  
Buggin's Avatar
Forum Regular
Joined: Sep 2009
Posts: 746
Likes: 1
From: Tampa, FL
Default Re: thanks Rudy great job, 3.27 works

And the message I took out of that was 'Rudy is progressing well with transvestites' lol

seriously, nice work man!
 
Reply
Old May 22, 2013 | 04:08 PM
  #9 (permalink)  
rcompart's Avatar
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 24
From: Chicago, IL
Default Re: thanks Rudy great job, 3.27 works

Originally Posted by Buggin
And the message I took out of that was 'Rudy is progressing well with transvestites' lol
wtf-animated.gif
 
Reply
Old May 22, 2013 | 07:03 PM
  #10 (permalink)  
JimmySkullz's Avatar
Senior Member
Joined: Oct 2008
Posts: 923
Likes: 11
From: Folsom Prison
Default Re: thanks Rudy great job, 3.27 works

Nice work!!
 
Reply
Old May 22, 2013 | 08:01 PM
  #11 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,607
Likes: 38
From: IN
Default Re: thanks Rudy great job, 3.27 works

LMAO...........sorry.......
 
Reply
Old May 23, 2013 | 12:12 PM
  #12 (permalink)  
rayth's Avatar
Senior Member
Joined: Jan 2008
Posts: 1,690
Likes: 3
From: Littleton, MA
Default Re: thanks Rudy great job, 3.27 works

I see what you did there.. trannys... transvestites...
 
Reply
Old May 23, 2013 | 12:31 PM
  #13 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: thanks Rudy great job, 3.27 works

Hmm.. first you start playing with rear ends.. then it's on to the tranny thing huh.. I like mine stock just fine..

 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tom2112
Parts/Accessories for sale - Archive
6
Oct 26, 2015 08:18 PM
stlas69
Cars For Sale - Archive
6
Sep 3, 2015 10:28 AM
RED DOG
Parts/Accessories for sale - Archive
1
Jul 21, 2015 07:58 AM
joethejeweler
Troubleshooting & Technical Questions & Modifications
2
Jul 7, 2015 08:58 PM
Blackout317
Troubleshooting & Technical Questions & Modifications
4
Jul 7, 2015 08:38 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 07:50 PM.