thanks Chris.......

 

and I just paid the remainder for my products to be shipped with bluecoupe's.


Thank you !!

 

LIST CLOSED

UPDATE 11-18-2014
A Big Thank You to everyone who participated (on the list and otherwise). Those on the list helped to make this happen and were rewarded with a special deal. That deal has ended, but there are still some scatter-shields left that (like ALL the rest that have shipped) come with the newer, low-profile hardware and will be available for $95 plus shipping.

Thanks again to everyone who participated!

Chris

 

Got mine this afternoon and I must say it looks nice. Now for the weather to cooperate so that I can install it this weekend.....

 

I'm glad you are pleased (but I expected that. of course ).



All of the shields were test fit on 2 of my SLK32 superchargers. First they were mounted to one of the SCs that is out of the car, with no pulleys, which made minor manipulation of the shield's hoop (for ideal alignment around the pulley) easier ... and then a final fit on the SLK32 that I drive. During this process, I checked the shield for "ringing" by thumping it lightly while it was bolted in place in order to determine the ideal location for the small square spacer (.125" thick, approx .37" square). Most all liked the spacer in the location shown in the video. ... while a couple of them liked it better when in the location imeadialtly to the left (from installer's perspective). I put a "sharpee" check mark on underside of the scatter-shields after I finished inspecting them. The few that liked the second location (for the spacer) got 2 check marks. Due to (supercharger) casting variations, this "ideal" location for the square spacer on your car may be the opposite of what I observed on my SC. SO, as a rule of thumb start with the location for the spacer shown in the video (except for those with 2 checks which should start in location 2), Then test it (using a light "thump" as shown in the video) and if you get some "ringing" ... try the other spacer location.


I would have put that explanation in the video, but that would have turned it from 4 minutes into 10

Cheers,
Chris

 

just need a warmer garage.....maybe this weekend.....lol Arrived very well packaged and very quick shipping. You get an EBAY rating of A++++++ lol....

 

Did not know about the deal. Wish I did.

 

It is still a steal @ $95 + shipping.

 

Chris, the package arrived safely. Many thanks from the Canadian crew!!

 

Thanks Steve .... that was my thought too



It is always a pleasure to help my friends (and cousin) up in the frozen north.

Cheers,
Chris

 

Finally go on to post a pic of mine installed, Thanks again Chris!!

 

Looks good, Jimmy!
Thanks for sharing the pic. Really like your attention to detail. I'm gonna have to go polish my air tube now.... I like that!

Cheers,
Chris

 

a little off topic. chris i hope all is well and the storms haven't hit you to hard.

 

thanks for asking, Steve

the storm got so bad I had to change my watger-logged Birkenstocks

actually, we are between storms and were not hit particularly hard here anyway. The sun is out today and my son and I are putting a fresher motor along with an upgrade or 2 into his turbo'd Miata.


Hope all is well your way, buddy!

Cheers,
Chris

 

Nice job..

 

ls7 with twin 6262 snails!!

 

Had few hours to myself today so I installed the Scattershield. Look's fantastic.
Thanks again Chris.

 

"a few hours"? Didn't you watch the video, cousin? It barely takes 4 minutes to install

glad you like it !

cheers,
Chris

 

But you have to uncover her, admire for a while and then get to it. It did only take as few minutes.....but I also ran her for a good while to wake her up from hibernation and then put her back to sleep.

 

I'm confused, are you talking about your car, or "Mrs Sparkie"? did you cut and paste that from "foreplay for dummies"?