Can someone tell me if #4 pulley and #9 are the same, I need to replace tensioner pulley and dealership wants me to buy the whole tensioner it self
Thanks in advance

 

1. what chart are you looking at ?
2. NA or SRT6 ?

 

C32 so srt 6
I don't know how to put the belt diagram on this site, they look the same idler and tensioner, but don't know. Thanks

 

dealership aka stealership.

Save picture to your computer or phone and download photobucket. Use the IMG tags in front and back of the URL address.

Never heard of the tensioner going bad, which is what is used to take the belt off. The idler pulleys and superchager bearing would be a good idea to replace. I just replaced those 3 things last week. Didn't mess with the tensioner. Unless you have a ton of miles on your ride.

 

I changed idler, guide pulley, and have 65mm sc pulley all done last 5 months, car only has 60,000 miles on it, I put new belt on cause after I installed dcai from needswing I was getting belt slip.
I can actually see the tensioner moving tiny bit when car running. When car in gear it's making noise. Thanks

 

Pull the pulley you want to change and take it to a NAPA auto parts . I have had good luck going that route. Any auto parts store will work. they have good selections of pulleys.

 

The tensioner should not move when belt is on correct, my tension moves so slightly back and forth.

 

You NEED a belt wrap kit. Especially with that smaller pulley.

 

I was looking at latemodel21 wow it looks awesome

The tensioner shouldn't move back and forth correct?

 

The tensioner pulley is replaceable on its own, dealerships like you to buy the whole assembly so they make more money.