Crossfire SRT6 A place to discuss SRT-6 specific topics.

What mods needed to run 11’s consistently.

Thread Tools
 
Old Apr 21, 2019 | 03:17 PM
  #1 (permalink)  
wiplash's Avatar
Thread Starter
Joined: Mar 2014
Posts: 13
Likes: 0
From: Seattle
Default What mods needed to run 11’s consistently.

New here and about ready to buy a SRT6. I have a mid 11 second JeepSRT that I want to match with an SRT6.
My question is, what mods are proven to get you into the 11’s consistently on pump gas.
Also, it would need to be able to handle daily driving duties. Will also be auto-crossing it.
From a little research on this matter, it seems like pulley swaps, intake, exhaust and tune are the most popular mods.
Please don’t roast the new guy too much.

Thanks in advance.
 
Reply
Old Apr 21, 2019 | 11:02 PM
  #2 (permalink)  
amx1397's Avatar
Senior Member
Joined: Apr 2008
Posts: 6,703
Likes: 435
From: Indialantic Fl./blairsville Ga
Default Re: What mods needed to run 11’s consistently.

all known mods without opening the engine will only result low 12's maybe a a a high 11. nitrous maybe , or do ilik i did ans install a sl55 V8 I am doing another v8 ,,,well read here. my fastest run was 10.55,,,consistently 10.65. jim

https://www.crossfireforum.org/forum...t=keeping+mods
 
Reply
Old Apr 22, 2019 | 05:58 PM
  #3 (permalink)  
wiplash's Avatar
Thread Starter
Joined: Mar 2014
Posts: 13
Likes: 0
From: Seattle
Default Re: What mods needed to run 11’s consistently.

Thats a nice build you got. A V8 swap is something I’m not looking to do.

Originally Posted by amx1397
all known mods without opening the engine will only result low 12's maybe a a a high 11. nitrous maybe , or do ilik i did ans install a sl55 V8 I am doing another v8 ,,,well read here. my fastest run was 10.55,,,consistently 10.65. jim

https://www.crossfireforum.org/forum...t=keeping+mods
 
Reply
Old Apr 22, 2019 | 11:20 PM
  #4 (permalink)  
JEFASOLD's Avatar
Senior Member
Joined: Aug 2012
Posts: 1,709
Likes: 10
Default Re: What mods needed to run 11’s consistently.

Originally Posted by wiplash
New here and about ready to buy a SRT6. I have a mid 11 second JeepSRT that I want to match with an SRT6.
My question is, what mods are proven to get you into the 11’s consistently on pump gas.
Also, it would need to be able to handle daily driving duties. Will also be auto-crossing it.
From a little research on this matter, it seems like pulley swaps, intake, exhaust and tune are the most popular mods.
Please don’t roast the new guy too much.

Thanks in advance.
you can do it with stacked pulleys 181 on crank, 70 on SC, MODIFIED MANIFOLDS, inMotion tune, sl55 fuel pump with pressure regulator, modified pulley setup, colder plugs, 550 injectors, mani crossovers, modified exhaust, larger SC cooling H/E, a few cooling mods and an addendum to another post I will see 22psi boost.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
crossfireracr
Car Shows
9
Jun 2, 2013 09:00 PM
LantanaTX
Troubleshooting & Technical Questions & Modifications
18
Feb 14, 2012 02:27 PM
Wedge
Crossfire SRT6
14
Jan 31, 2010 05:00 PM
onelove
Crossfire SRT6
16
Feb 13, 2009 04:24 PM
chuckhaze
Troubleshooting & Technical Questions & Modifications
30
Sep 10, 2003 10:43 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:39 PM.