2004 V8 6-speed
Joined: Jan 2013
Posts: 112
Likes: 0
From: Arlington, Texas
Re: 2004 V8 6-speed
No that housing won't work, the 55 has a expansion bellows that controls the flow of oil to the ext cooler(s)
It looks like the entire lower support casting has been ripped off the block...just sayin...
It looks like the entire lower support casting has been ripped off the block...just sayin...
Joined: Jan 2013
Posts: 112
Likes: 0
From: Arlington, Texas
Re: 2004 V8 6-speed
Yes, the D630 HD/software works good in the Dell D630 but in order to power up and sync the C4/SD unit I will have to plug into the OBII for a power source. With the SRT disabled, maybe you know of another way to pwr up w/o plugging in or can I plug into any OBII, i.e. MDX? We have seen the YouTube vids where they are using a mock up setting vs actual vehicle… No biggie, I’ll set it up when the time is right…which is not too far away… About done with your voodoo magic on your end?
Just curios if you are a member here>> Daimler Group Mercedes-Benz An international source of techies just like you, I think I will join ($10 donation required).
Everything good w/your car?...
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
Yes, the D630 HD/software works good in the Dell D630 but in order to power up and sync the C4/SD unit I will have to plug into the OBII for a power source. With the SRT disabled, maybe you know of another way to pwr up w/o plugging in or can I plug into any OBII, i.e. MDX? We have seen the YouTube vids where they are using a mock up setting vs actual vehicle… No biggie, I’ll set it up when the time is right…which is not too far away… About done with your voodoo magic on your end?
Just curios if you are a member here>> Daimler Group Mercedes-Benz An international source of techies just like you, I think I will join ($10 donation required).
Everything good w/your car?...
Just curios if you are a member here>> Daimler Group Mercedes-Benz An international source of techies just like you, I think I will join ($10 donation required).
Everything good w/your car?...
You can still plug into your car right now. No worries on that. You just wont be able to get into certain things or do certain things without the ECU there. DAS sim is what you want to be playing in for now though, which it doesn't need to be plugged into anything for.
The ECU is ready to send back, whenever you are ready for it lol.
No I'm not, I tried to once but couldn't, not sure why.
Everything on my car is finally perfect motor wise. No CEL, all the monitors are ready. No leaks, squeaks or anything... Yay! lol
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
So it sounds like things are getting serious. Thanks to a member here, this weekend I'm going to LA to try and help a guy that builds Porsche's. He needs me to figure out what I can do to re-code ECU's to other models and such. Apparently he builds some good one's too lol, he's been working on a GT3 RS that is modded to hell that I'll get to check out. He said there are 14 others in the shop for me to see as well.
Senior Member
Joined: Jan 2009
Posts: 6,285
Likes: 5
From: Carmel, In.
Re: 2004 V8 6-speed
So it sounds like things are getting serious. Thanks to a member here, this weekend I'm going to LA to try and help a guy that builds Porsche's. He needs me to figure out what I can do to re-code ECU's to other models and such. Apparently he builds some good one's too lol, he's been working on a GT3 RS that is modded to hell that I'll get to check out. He said there are 14 others in the shop for me to see as well.
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
He sent me one, so it shouldn't be too big of a deal lol. I'll make sure I get some good one's just for you! 
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
Porsche_zps2de368ba.jpg
What I want to know, is who in their right mind tears apart a GT3 RS to make it better!? lol
Last edited by sk8erjosh09; Feb 20, 2014 at 02:44 PM.
Senior Member
Joined: Jan 2009
Posts: 6,285
Likes: 5
From: Carmel, In.
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
LOL, apparently people who don't want it to catch fire and burn LMAO
Yahoo!
That is so stripped I thought it was a caymen at first...
Yahoo!
That is so stripped I thought it was a caymen at first...
It is crazy stripped. That roll cage is crazy too. The headlights and bumper look modified compared to the GT3's too.
Forum Regular
Joined: Jan 2012
Posts: 787
Likes: 1
From: Boise, ID
Re: 2004 V8 6-speed
It takes a real man to cut a car up! I finally had to man up on my Wrangler and do some tub mods for better functionality. Form sometimes takes a back seat to function!
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
Ended up putting it off until next weekend, family issues came up. Which I could use prayers for, thanks in advance.
Agreed. Could you imagine cutting up a car that costs THAT much though? lol
Hell yeah it is. They mean business with this thing.
Hell yeah it is. They mean business with this thing.
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: 2004 V8 6-speed
Don't know why, but I'll include "Dear Lord, please help Josh and his family out with whatever problems they have - he's a good guy and deserves Your attention." in my prayers.
Thread Starter
|
Senior Member
Joined: May 2011
Posts: 2,192
Likes: 24
From: Ridgecrest, CA
Re: 2004 V8 6-speed
Appreciate it greatly, thanks.
Last edited by sk8erjosh09; Feb 24, 2014 at 11:30 AM.
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: 2004 V8 6-speed
