15-1/4" Spoke and Wheel Brush CHEAP $2.99
15-1/4" Spoke and Wheel Brush CHEAP $2.99
15-1/4" Spoke and Wheel Brush
I know people on this forum are always looking for these brushes.
Great price, at Harbor Freight $3.99 or $2.99 with internet coupon
For Detail:
http://www.harborfreightusa.com/usa/itemdisplay/displayItem.do?itemid=98283
brush.gif
I know people on this forum are always looking for these brushes.
Great price, at Harbor Freight $3.99 or $2.99 with internet coupon
For Detail:
http://www.harborfreightusa.com/usa/itemdisplay/displayItem.do?itemid=98283
brush.gif
Last edited by Fired UP; 08-21-2008 at 02:27 PM.
Join Date: Sep 2005
Location: Brookeville, Maryland
Age: 73
Posts: 2,700
Likes: 0
Received 1 Like
on
1 Post
Re: 15-1/4" Spoke and Wheel Brush CHEAP $2.99
Bottle brushes are great, except I don't do wheels with then. They have bristles that can scratch or mark wheels with a soft coating, most have a spiral wound wire center that can scratch if if contacts wheel. I found these at Albertson's on sale for $0.99 and really like them. Bought 1/2 dozen 'cause they will have a shorter service life. Handle is plastic and no metal on brush. Sponge strips are glued on.
Just my preference.
John P.
Just my preference.
John P.
Join Date: Sep 2005
Location: Brookeville, Maryland
Age: 73
Posts: 2,700
Likes: 0
Received 1 Like
on
1 Post
Re: 15-1/4" Spoke and Wheel Brush CHEAP $2.99
I would agree with your points on the bottle type brushes, you have to be careful. I've not scratched a wheel yet. I tried the brush you mentioned and I don't like cleaning quality vs. the bristle brush. To each his own though if that works for you, the price is sure right.
Pat
Pat
Re: 15-1/4" Spoke and Wheel Brush CHEAP $2.99
Get a wooden paint stir stick and stick a couple of inches of lambskin or similar on the end. This does a good job of the large flat area, reaching 8" or so to the inside, it leaves a small `V' shape behind the spokes and that can be done with your fingers.
Thread
Thread Starter
Forum
Replies
Last Post
Selbyl
WTB - Items/Parts Wanted to Buy - Archive
2
09-26-2015 04:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)