Engine, Exhaust, Transmission and Differential Post questions here that have to do with the engine, cooling system, air intake, exhaust, Transmission and Differential

Tramp Stamp Tatoo Muffler Hanger

Thread Tools
 
Old Jul 3, 2011 | 08:16 PM
  #1 (permalink)  
Squirrel Crusher's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2007
Posts: 1,530
Likes: 7
From: Charlotte,NC
Default Tramp Stamp Tatoo Muffler Hanger

Got the muffler idea from starring at a woman's Tramp Stamp Tatoo on her lower back while standing in a grocery store line. I wanted to pull out my cell phone to take a close up picture,but I could tell she was getting somewhat upset with this old man starring. Anyway,the hanger mod was water jetted out of 1/2" thick 304 stainless,then polished out. Rob at NeedsWings hooked me up with 8 pieces of 45 degree stainless fittings and two Moroso Twister stainless mufflers. Used a dual inlet/outlet Tru-X Magnaflow resonator 14386 midways of the car. Low soft deep mellow sounds in the car's cabin,but can easily hurt the ears of who ever's behind me at wide open throttle only! I have no way of producing a sound clip unless there's a member here in Charlotte,NC. Stock muffler with 6" of piping attached weight's in at 20 pounds 15 and 1/2 OZ. My muffler mod with hanger weight's in at 11 pounds and 11 OZ. VAROOOOM !! Squirrel Crusher
 
Attached Images
File Type: jpg
R1-01975-007A.jpg (866.9 KB, 158 views)
File Type: jpg
R1-01975-012A.jpg (1.34 MB, 132 views)
File Type: jpg
R1-01975-015A.jpg (911.0 KB, 146 views)
Reply
Old Jul 3, 2011 | 08:21 PM
  #2 (permalink)  
JimmySkullz's Avatar
Senior Member
Joined: Oct 2008
Posts: 923
Likes: 11
From: Folsom Prison
Default Re: Tramp Stamp Tatoo Muffler Hanger

Very Cool!
 
Reply
Old Jul 3, 2011 | 08:41 PM
  #3 (permalink)  
velociabstract's Avatar
Senior Member
Joined: Jul 2008
Posts: 4,525
Likes: 29
From: Puerto Rico
Default Re: Tramp Stamp Tatoo Muffler Hanger

I'm afraid you nailed with the tramp stamp. But I like it ........ shhhh!

Les
 
Reply
Old Jul 3, 2011 | 08:49 PM
  #4 (permalink)  
DavidOv54367's Avatar
Joined: Nov 2009
Posts: 141
Likes: 0
Default Re: Tramp Stamp Tatoo Muffler Hanger

Wow..very nice! At first i wasn't sure what to expect but it looks very clean.
 
Reply
Old Jul 3, 2011 | 08:51 PM
  #5 (permalink)  
InfernoRedXfire's Avatar
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Default Re: Tramp Stamp Tatoo Muffler Hanger

HAHAHAHAHA! Now that there is funny, but cool. Nice job.
 
Reply
Old Jul 3, 2011 | 09:28 PM
  #6 (permalink)  
Erzer's Avatar
Senior Member
Joined: Dec 2007
Posts: 2,123
Likes: 1
Default Re: Tramp Stamp Tatoo Muffler Hanger

Nice job, when I saw the picture of it on the car I was thinking batman for some reason.
 
Reply
Old Jul 3, 2011 | 11:36 PM
  #7 (permalink)  
Coyote's Avatar
Senior Member
Joined: Dec 2004
Posts: 861
Likes: 9
From: Kennesaw
Default Re: Tramp Stamp Tatoo Muffler Hanger

Dude, that is bad ***!!!!

You need to manufacture that. I'd be interested in a set.

Coyote
 
Reply
Old Jul 4, 2011 | 06:56 AM
  #8 (permalink)  
waldig's Avatar
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Re: Tramp Stamp Tatoo Muffler Hanger

For a simple and STRONG support that does not conduct vibration well, I used two 8" stainless steel clamps to cradle the pipes off the factory hangers. The rubber thing was a PITA and a POS to work with. Woody

https://www.crossfireforum.org/galle...sfire_rear.jpg
 
Reply
Old Jul 4, 2011 | 08:00 AM
  #9 (permalink)  
tighed1's Avatar
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 98
From: Sierra Vista, Arizona
Default Re: Tramp Stamp Tatoo Muffler Hanger

Interesting that you would be looking at a girl's tattoo and associate it with your car!
 
Reply
Old Jul 4, 2011 | 09:34 AM
  #10 (permalink)  
James1549's Avatar
Senior Member
Joined: May 2008
Posts: 10,458
Likes: 156
From: Cincinnati ( Delhi )
Default Re: Tramp Stamp Tatoo Muffler Hanger

very nice work.

Interesting, both designs are on the "back side" of the intended item...
 
Reply
Old Jul 4, 2011 | 09:38 AM
  #11 (permalink)  
acrispy1's Avatar
Senior Member
Joined: Apr 2006
Posts: 4,907
Likes: 1
From: Long Island NY
Default Re: Tramp Stamp Tatoo Muffler Hanger

Great job, very nice...
 
Reply
Old Jul 4, 2011 | 11:32 AM
  #12 (permalink)  
Squirrel Crusher's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2007
Posts: 1,530
Likes: 7
From: Charlotte,NC
Default Re: Tramp Stamp Tatoo Muffler Hanger

Hey thanks guys. Gotta go spin (a wheel) . Haven't installed the WaveTrac LSD yet.. Squirrel Crusher
 

Last edited by Squirrel Crusher; Jul 4, 2011 at 11:36 AM.
Reply
Old Jul 4, 2011 | 11:52 AM
  #13 (permalink)  
Joliet John's Avatar
Senior Member
Joined: Jul 2010
Posts: 812
Likes: 5
From: Joliet, IL
Default Re: Tramp Stamp Tatoo Muffler Hanger

I dig tribals (which is clearly what her tattoo was), tramps stamps and cool car stuff. Congrats on combining all three!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TerryR
Cars For Sale - Archive
13
Dec 13, 2019 03:27 PM
Big_Country
Cars For Sale - Archive
3
Sep 22, 2015 03:47 PM
Sweet2002
Crossfire SRT6
3
Sep 13, 2015 02:12 AM
RiderJC
Crossfire SRT6
6
Sep 7, 2015 11:19 PM
rmcdaniel12
All Crossfires
0
Jul 21, 2015 11:35 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 05:25 PM.