Exterior & Lighting Any questions related to exterior, lighting and styling go in here.

HELP!! Lights dont blink

Thread Tools
 
Old Jan 2, 2010 | 01:00 AM
  #1 (permalink)  
murtazanooruddin's Avatar
Thread Starter
Joined: Jan 2009
Posts: 63
Likes: 0
Question HELP!! Lights dont blink

05 crossfire. you know how when u lock or unlock the car both the right and the left flashers flash twice well mine used to also but now it only flashes on one side wether im locking or unlocking . i was wondering if nyone else is having that problem and if so how to fix it?

thanks
 
Reply
Old Jan 2, 2010 | 09:07 AM
  #2 (permalink)  
MikeR's Avatar
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Default Re: HELP!! Lights dont blink

My first thoughts would be to check the bulbs first and see if you have one out. Then check the fuses. There are fuses for left and right side.
 
Reply
Old Aug 18, 2010 | 10:28 PM
  #3 (permalink)  
rekcah's Avatar
Forum Regular
Joined: Nov 2007
Posts: 328
Likes: 2
From: SEATTLE
Default Re: HELP!! Lights dont blink

any update on this problem? I'm having the same issue. When I press lock, sometimes both left and right same blinks then sometimes only the right side blinks.
 
Reply
Old Aug 19, 2010 | 07:51 AM
  #4 (permalink)  
Phil's Avatar
Joined: May 2005
Posts: 70
Likes: 0
Default Re: HELP!! Lights dont blink

Guys,

i have a similiar problem. My left drivers side front turn signal doesn't work. On the dash, it gives me a fast flash rather than the standard. I have replaced the bulb, which did not fix it. When it first started to happen, it was an intermittent problem. Now it's all the time. I've checked the fuse and it looks good. Any help would be appreciated. My car is a 2005 coupe.

Thanks ...
 
Reply
Old Aug 19, 2010 | 04:09 PM
  #5 (permalink)  
rekcah's Avatar
Forum Regular
Joined: Nov 2007
Posts: 328
Likes: 2
From: SEATTLE
Default Re: HELP!! Lights dont blink

i've posted a youtube video of the problem

YouTube - Lights dont blink

Fuse, bulb and battery replaced with no luck. What module controls the blinking of the blinkers when the lock/unlock buttons are pressed?

When using the turn signal it lights up just fine.
 
Reply
Old Aug 19, 2010 | 04:22 PM
  #6 (permalink)  
Franc Rauscher's Avatar
Senior Member
Joined: Mar 2008
Posts: 8,498
Likes: 1,122
From: St Louis MO
Default Re: HELP!! Lights dont blink

Check the level of your blinker fluid.

We recommend "BLINKY" brand blinker fuid.

I use it in all my cars.
 

Last edited by Franc Rauscher; Aug 19, 2010 at 04:26 PM.
Reply
Old Aug 19, 2010 | 04:37 PM
  #7 (permalink)  
rekcah's Avatar
Forum Regular
Joined: Nov 2007
Posts: 328
Likes: 2
From: SEATTLE
Default Re: HELP!! Lights dont blink

Should I make sure that the Blinky Blinker Fluid is Synthetic?

Should I get some Elbow Grease with it too?
 
Reply
Old Aug 19, 2010 | 04:44 PM
  #8 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: HELP!! Lights dont blink

Originally Posted by rekcah
i've posted a youtube video of the problem

YouTube - Lights dont blink

Fuse, bulb and battery replaced with no luck. What module controls the blinking of the blinkers when the lock/unlock buttons are pressed?

When using the turn signal it lights up just fine.
From the repair manual.




OPERATION








The Sentry Key Remote Entry Module (SKREEM) has the following functions: receiving and evaluating the Radio Frequency (RF) keyless entry remote signal, actuation of door locks in conjunction with the Central Locking Pump/Security System Module, and enabling the vehicle theft security alarm with confirmation via the turn signals. When the RKE transmitter is operated, an RF signal is transmitted. If the SKREEM recognizes the RF signal as valid, it actuates the Central Locking Pump/Security System Module through the Body Control Module. The vehicle is then locked or unlocked through the power locks system. Connected to the SKREEM is a Sentry Key Antenna Ring which surrounds the ignition lock cylinder. When the ignition is switched on, the Sentry Key Antenna Ring is supplied with power. A data block is transmitted inductively via the Sentry Key Antenna Ring to the SKREEM and then ......

 

Last edited by onehundred80; Aug 19, 2010 at 05:51 PM.
Reply
Old Aug 19, 2010 | 04:52 PM
  #9 (permalink)  
Franc Rauscher's Avatar
Senior Member
Joined: Mar 2008
Posts: 8,498
Likes: 1,122
From: St Louis MO
Default Re: HELP!! Lights dont blink

Originally Posted by rekcah
Should I make sure that the Blinky Blinker Fluid is Synthetic?

Should I get some Elbow Grease with it too?
The Kale product is fake. It is bad for the environment.

Blinky Blinkerfluid is real and is biodegradable.

www.blinkerville.com

Ask anybody who has tried it.
It is safe enough to drink
 
Reply
Old Sep 29, 2010 | 11:26 PM
  #10 (permalink)  
rekcah's Avatar
Forum Regular
Joined: Nov 2007
Posts: 328
Likes: 2
From: SEATTLE
Default Re: HELP!! Lights dont blink

problem fixed itself.

The only thing I did was seal the gas filler bowl gasket as mentioned in this post
https://www.crossfireforum.org/forum...tml#post491512.

Then I guess what ever had some moisture dried out.

Since I had the interior pulled out to seal the gas filler bowl, I also removed the flaps in the vent that makes that fluttering sound when the subs are thumping.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2004_
Audio, Video and Electronics
27
Jul 9, 2025 12:39 AM
jgreen
Engine, Exhaust, Transmission and Differential
106
Sep 18, 2017 11:46 PM
xfClifford
Troubleshooting & Technical Questions & Modifications
27
Nov 10, 2015 10:08 PM
KwehCat
WTB - Items/Parts Wanted to Buy - Archive
3
Jul 16, 2015 04:48 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 05:55 AM.