Exterior & Lighting Any questions related to exterior, lighting and styling go in here.

Final thoughts on these eBay Diffusers?

Thread Tools
 
Old Sep 8, 2018 | 08:18 PM
  #1 (permalink)  
James1549's Avatar
Thread Starter
|
Senior Member
Joined: May 2008
Posts: 10,458
Likes: 156
From: Cincinnati ( Delhi )
Default Final thoughts on these eBay Diffusers?

I know some time ago there was an issue with quality and fitment of some copy aftermarket diffusers for the rear.

Currently the following auction has sold 42 sets of these. Anyone have experience with these?

https://www.ebay.com/itm/Chrysler-Cr...FW9CLK&vxp=mtr

Thanks, James
 
Reply
Old Sep 8, 2018 | 11:34 PM
  #2 (permalink)  
STRANDD's Avatar
Joined: Sep 2017
Posts: 101
Likes: 2
From: Denver, CO
Default Re: Final thoughts on these eBay Diffusers?

If you're nervous about buying them off of Ebay, you can get them on sale at TheCrossfireStore.com for $229.95 plus $14.95 SH.
 
Reply
Old Sep 9, 2018 | 09:34 AM
  #3 (permalink)  
andrew's Avatar
Administrator
Joined: Nov 2003
Posts: 7,525
Likes: 18
From: Columbus, Ohio
-C-I-C-C-I Associate Member
Default Re: Final thoughts on these eBay Diffusers?

~ I've seen a few cars with them installed and they don't look bad in person.

However if one has a light colored car, paint the tow hook with some plastic dip in black to mute it before install.
 
Reply
Old Sep 9, 2018 | 09:51 AM
  #4 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Final thoughts on these eBay Diffusers?

I cannot see why someone could not make four correctly shaped blocks and screw them to the existing panel.
I think that is a lot of money for a bit of plastic.
Way back someone made some from wood I think. I bet you would not be able to tell the difference unless you got real close.
 
Reply
Old Sep 9, 2018 | 06:07 PM
  #5 (permalink)  
Jim Holian's Avatar
Forum Regular
Joined: Nov 2017
Posts: 521
Likes: 19
From: Alexandria, Kentucky
Default Re: Final thoughts on these eBay Diffusers?

180 - I agree - that's a lot of money for some plastic molding. Seems like a retired hobbyist with some resin and fiberglass experience could make a mold and whip these out on an as ordered basis. Maybe I'm over-simplifying the job, but then I'm not a resin and fiberglass specialist.

Jim
 
Reply
Old Sep 9, 2018 | 09:32 PM
  #6 (permalink)  
James1549's Avatar
Thread Starter
|
Senior Member
Joined: May 2008
Posts: 10,458
Likes: 156
From: Cincinnati ( Delhi )
Default Re: Final thoughts on these eBay Diffusers?

Originally Posted by onehundred80

Way back someone made some from wood I think. I bet you would not be able to tell the difference unless you got real close.
Dave, yes you are correct, balsa wood was used to make these!

 
Reply
Old Sep 9, 2018 | 11:58 PM
  #7 (permalink)  
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: Final thoughts on these eBay Diffusers?

I had to LOL! But I envy a guy that has the free time to whittle out a set of diffusers for the model X-Fire. Nicely done.
 
Reply
Old Sep 10, 2018 | 12:04 AM
  #8 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Final thoughts on these eBay Diffusers?

Originally Posted by James1549
Dave, yes you are correct, balsa wood was used to make these!
You're the man James.

 
Reply
Old Sep 10, 2018 | 09:14 AM
  #9 (permalink)  
TheCrossfireStore's Avatar
Former Vendor
Joined: Jun 2016
Posts: 87
Likes: 0
From: Florida
Default Re: Final thoughts on these eBay Diffusers?

James,

The Ebay listing is our listing as well. While we did originally make these out of fiberglass, we decided it would be best to switch over to ABS plastic. They are slightly textured now to hide any markings that might occur from road debris being kicked up. This was done after more than a few customers said that the fiberglass version showed the hits more than they liked. These can still be painted have no fitment issues. If it will set your mind at ease we would have no issue sending a set out to you for you to test fit as a courtesy for a forum member. If you like the fit and finish, we'll consider it a sale and give you 25% off. If not you can send them back and no harm no foul. Please send us a message and let us know if that is something you'd like to pursue.

Please keep in mind guys, the price will eventually drop on these, we are still covering the cost of making the new ABS molds. Once that is absorbed the price will drop down a bit more. It will happen, just please continue to be patient. As for STRANDD, you can send us over a message if the time arises that you ever want to purchase anything and we'll get you a discount as well for the name drop.
 
Reply
Old Sep 10, 2018 | 10:11 AM
  #10 (permalink)  
STRANDD's Avatar
Joined: Sep 2017
Posts: 101
Likes: 2
From: Denver, CO
Default Re: Final thoughts on these eBay Diffusers?

Thanks Crossfire Store. You've been good to do business with.

 
Reply
Old Sep 10, 2018 | 05:57 PM
  #11 (permalink)  
James1549's Avatar
Thread Starter
|
Senior Member
Joined: May 2008
Posts: 10,458
Likes: 156
From: Cincinnati ( Delhi )
Default Re: Final thoughts on these eBay Diffusers?

Now that's an offer that is hard to refuse! PM sent.

Thanks, James
 
Reply
Old Sep 11, 2018 | 07:34 AM
  #12 (permalink)  
Southernscrew's Avatar
Forum Regular
Joined: Feb 2012
Posts: 310
Likes: 6
From: Walton, Kentucky
Default Re: Final thoughts on these eBay Diffusers?

Thanks Crossfirestore,
I'll try a set to !!
Ken
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FP
All Crossfires
5
Dec 19, 2013 01:50 PM
Billy22Bob
Crossfire SRT6
11
Sep 12, 2013 06:14 PM
James1549
Exterior & Lighting
13
Dec 23, 2010 01:37 PM
FP
Wheels, Brakes, Tires and Suspension
31
Oct 13, 2008 07:30 AM
robby
Crossfire Coupe
6
May 15, 2004 10:18 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 11:33 PM.