What's under the Hump?
I believe not much is there. I have not taken that area apart yet in either of my x-fires but there are sub ports behind each seat. So, I believe all it is is 1. A separator between the front and the cargo area 2. A support structure to stiffen the chassis and 3. An area to house the sub and or amp? Thats what I can come up with without taking it apart. Not to mention a place to put nifty bag hooks and some accessory holders
Any one please correct me if my logic is wrong.
Any one please correct me if my logic is wrong.
Originally Posted by Black_X_Fire_04
I believe not much is there. I have not taken that area apart yet in either of my x-fires but there are sub ports behind each seat. So, I believe all it is is 1. A separator between the front and the cargo area 2. A support structure to stiffen the chassis and 3. An area to house the sub and or amp? Thats what I can come up with without taking it apart. Not to mention a place to put nifty bag hooks and some accessory holders
Any one please correct me if my logic is wrong.
Any one please correct me if my logic is wrong.It is also why the coupe and the Convertable are equaly stiff.
It protects the gas tank.
In a side impact (Tbone) it keeps the car from folding in half.
The SLK 320 upon which the Crossie is based, only came as a ragtop. So, the hard top of your coupe is not a stiffiner of the body but a roll cage.
BTW the roll bar loops are fake.
roadster with a stick
1) Take a 1/2" drill bit and chuck it into your favorite drill.
2) Find the centerline of the car and make a mark 3" below the top of said "hump".
3) Start drilling until you find...GASOLINE!
Franc, you're just no danged fun!
2) Find the centerline of the car and make a mark 3" below the top of said "hump".
3) Start drilling until you find...GASOLINE!
Franc, you're just no danged fun!
Originally Posted by maxcichon
1) Take a 1/2" drill bit and chuck it into your favorite drill.
2) Find the centerline of the car and make a mark 3" below the top of said "hump".
3) Start drilling until you find...GASOLINE!
Franc, you're just no danged fun!
2) Find the centerline of the car and make a mark 3" below the top of said "hump".
3) Start drilling until you find...GASOLINE!
Franc, you're just no danged fun!
roadster with a stick
Thread
Thread Starter
Forum
Replies
Last Post
Peg
Troubleshooting & Technical Questions & Modifications
7
May 21, 2015 07:53 AM
danhaman
Audio, Video and Electronics
5
Feb 2, 2009 03:53 PM
CrossfirePilot
Troubleshooting & Technical Questions & Modifications
8
Mar 13, 2007 01:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



