Hello friends. I am new roadster owner couple months. When i bought this beauty it was really bad condition. I got only 1 key which works only driver side door. Ignition start was with screw so i install keyless start button its works fine now. But i got problem with central key locking system. Key doesnt work with car. Car is europe model (uk) so i cant lock car car. If i try lock key with driver door is locking only driver door. Central console button works only UNLOCK button but not lock! So i bought universall central locking system like pic

Universal locking system
I tryed conncet with screm 8 and 9 pin try connect with some wires of rear cars central locking module but doesnt work new locking system. So i want to ask you which way is best to connect wires to the car?

 

Please proof read your post, some of the sentences are very hard to understand. If English is not your first language, I know it is hard, but we must understand what you are saying.

It sounds like you have a problem with the central locking pump, adding a new remote system won't fix that, your locks are pneumatic, not electric. I think a new central locking pump is likely the answer.

As for me, I would NEVER NEVER NEVER suggest someone add aftermarket remote lock kits, remote start kits, etc.
And I do not waste any time trying to figure out how to integrate them in a car whose electronics are as intricate and poorly documented as is the case with our damn cars........

 

Sorry for my english for first. All right i try one more time. I installed new start keyless button becouse my ignition key was broken. It works fine now. But when i connect battery is start flashing hazzarts lights couple minutes like alarm system actived. After 2 min its stop. When start engine its start flashing again. If engine start i open door or car boot its flashing again. How its stoped? I dont have any key just imobilizer fob nothing more. How stop this flashing hazzarts ? And second how install new universal alarm system pic on first top. I dont know where is best way conncet wire? I tryed to screem module conncect 2 wires pin 8 and 9 not helped. Car is UK europe. Thank you

 

Hello,
i'm curious to see how did you connect it?

 

Year and a half old thread !!