Can anyone recommend a product to touch up the dark grey leather bolster on our seats? It is an SRT-6.

 

I'm told the Colorbond product line is a good source for matching the interior leather color in the XFires. Here's a link to the Dark Slate Gray product sold on their website: CLICK. I've found this on Amazon also.

You can also purchase the Dark Slate Gray color in a small bottle from OEM supplier. It's typically listed on eBay. CLICK

There is also a post by Mike-in-Orange regarding the Colorbond product. He used it to make a color change, but can attest to the product's quality. He stated that his seat bolsters were worn and this made the appearance near new by just applying the paint. Here's the link to where his posting starts: CLICK

 

I would be leary of most leather stains as they are more like a paint than a liquid watery stain. The "alcantara" bolster is a synthetic suede material that is used on the SRT6.
Perhaps a upholstery shop could give you good advice.
here is a link to a Sonex cleaner for alcantara :

 

ZERACER
I had a couple of worn spots on my console, and stopped at a local Chrysler dealership for the Dark Slate Gray touch up paint and found that it DOES NOT match the dark slate gray of the SRT6 model, much lighter.
I did a little research and found a company in Germany that has the exact matching Dark Slate Gray for our SRT6's. I ordered a bottle and found it to be an EXACT match to our dark gray. It's expensive and takes about two weeks to arrive.
The link is below for the specific paint I've mentioned. You may want to send them an email to confirm they will supply you with the dark slate gray paint for the napa leather bolsters as well as the other interior pieces that have the same color. ZIP misread your post, it has nothing to do with the alcantara suede inserts.
Good Luck.....
Dennis
DTMenace
Chrysler Crossfire leather+Interior paint dark slate grey | eBay

 

Thanks