I am looking for a set of used junk fog lights really I only need the plug that plugs into the stock wiring thanks

 

If I recall properly, the fogs use a 9006 bulb. You should be able to buy the socket and pigtail at NAPA or any other automotive store. If you bought a pair of used Fogs, I doubt that wiring would be included.

James

 

Here is what you need:

Fog Lamp Connector#

and another

http://www.autozone.com/autozone/cat...questid=691218

 

I don't really want fog lights on my car I just want to use the factory switch to power something else and I don't want to cut into the factory wiring. So does the factory wiring plug right into the bulb or is there a wire I can cut into?

 

Yes the factory wiring should plug directly into the bulb. Never saw a plug that will plug into the existing connector on the car, only bulbs.

Cutting off those connectors, leaving 6" of pigtail wire attached, shouldn't be a problem to reinstall them one day when you reinstall your fogs again.


Good Luck, James

 

that looks perfect thank you!