aftermarket rollbar
Re: aftermarket rollbar
Originally Posted by trickpony31
hello to all, i am looking for taller roll bars,
does anyone make these?
does anyone make these?
Please post back if you do find and get one.
Re: aftermarket rollbar
Originally Posted by trickpony31
hello to all, i am looking for taller roll bars,
does anyone make these?
does anyone make these?
Re: aftermarket rollbar
Originally Posted by HDDP
Are you driving a coupe or roadster ? We are having http://www.autopowerindustries.com build a cage kit for the coupe', but could probably have a roll bar kit made for the roadster as well...
Thanks,
Simon.
Re: aftermarket rollbar
Simon: I've been out of town working on a movie, but flew back to pick-up the car from Auto Power Industries on Wednesday. They did a great job on the roll cage. Bare in mind, mine is full race in a gutted car with NASCAR style door bars, and X brace in the rear.
I asked Rick, the owner to make a template for a bolt-in system incase someone from the forum wanted to install the main hoop in their stock car... I forgot to ask him if he did, when I picked-up the car.
I'll try to snap some pictures and post them before I go back to Texas on Saturday.
I asked Rick, the owner to make a template for a bolt-in system incase someone from the forum wanted to install the main hoop in their stock car... I forgot to ask him if he did, when I picked-up the car.
I'll try to snap some pictures and post them before I go back to Texas on Saturday.
Re: aftermarket rollbar
Originally Posted by HDDP
Simon: I've been out of town working on a movie, but flew back to pick-up the car from Auto Power Industries on Wednesday. They did a great job on the roll cage. Bare in mind, mine is full race in a gutted car with NASCAR style door bars, and X brace in the rear.
I asked Rick, the owner to make a template for a bolt-in system incase someone from the forum wanted to install the main hoop in their stock car... I forgot to ask him if he did, when I picked-up the car.
I'll try to snap some pictures and post them before I go back to Texas on Saturday.
I asked Rick, the owner to make a template for a bolt-in system incase someone from the forum wanted to install the main hoop in their stock car... I forgot to ask him if he did, when I picked-up the car.
I'll try to snap some pictures and post them before I go back to Texas on Saturday.
Yes, I think anything other than just a bolt-in main hoop would be impractical for a road/occasional track car - most people don't like the idea of chopping chunks out of their trim. Incidentally Rick's prices looked pretty good when I compared his 911 race cages against what is available over here, even with shipping taken into account.
Re: aftermarket rollbar
Originally Posted by HDDP
Here are some photos of the cage... Still have much work to finish on the cockpit, wiring harnesses and metal work as well as painting. Hope to have it done by the end of July.
Those door bars look very substantial! Do the front legs drop down through the dash (near where the tweeters used to be) or is that all still intact?
Re: aftermarket rollbar
Originally Posted by woody
Looking Good, Derek!
Those door bars look very substantial! Do the front legs drop down through the dash (near where the tweeters used to be) or is that all still intact?
Those door bars look very substantial! Do the front legs drop down through the dash (near where the tweeters used to be) or is that all still intact?
Surprisingly only added 112 lbs to the car. Now it's weighing in at 2,792 lbs.
It's a mess inside still, but I'll be taking care of that in the next few weeks.
I'm still trying to figure out why I've go a CEL after the dyno pull... And how to adjust the FAM so it doesn't run so lean.
Thread
Thread Starter
Forum
Replies
Last Post
usprb1976
TSBs and How-To Articles
5
04-04-2024 04:57 PM
Blackktieguy
Engine, Exhaust, Transmission and Differential
21
10-26-2015 12:32 AM
firefly04
Wheels, Brakes, Tires and Suspension
4
08-26-2015 03:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)