Hi, my car didn't come with the homelink garage door opener. My friend has one in his car that he doesn't use. do you know if it can be removed without leaving a mark on his car and installed in my car? i'm pretty good at wiring things up if needed. alternatively, can I just buy one from Chrysler and install it myself or does it have to be pre-installed by the dealer when the car is new?

THANKS GUYS!!!

 

You can’t remove the homelink from your friend’s car without leaving a mark since a hole is cut in the headliner in front of the light. Also there is no wiring for the homelink in a base. I know since I am trying to do the same thing. You might be able to tap into the power for the light but the service manual says it is connected through the ignition switch. Since my car is in storage for the winter I think I will have to remove the headliner to get a good cut in the headliner for the homelink. It clips to the headliner and uses a connector (2 lead) that looks like the power connector from a computer fan. I picked mine up on ebay for about $35 where I think the same part from the dealer is over $200.

 

thanks for the great info and advice. please keep me updated on your progress. THANKS!

from Korea,

AUCLUTCH