i think that my brake sensor is ruined maybe because i waited too long to change de brake pads and one of them is kind of burned up, hard to explain... can this part be changed? (sensor on brake pad)

 

when i bought the akebono pads new sensors were in the box. i think 2$ from the m/b dealer

 

6$ from a chrysler dealer.

 

zipped tied and out of the way on my stoptech calipers.

 

thanks for the help but is there a way to et rid of the annoying light indicator in the car instead? or else ill change it cause there is one that is completely ruined .....
thanks again!

 

by the way, i am doubting on how i installed the sensors on the calipers... i don't know why because they used to work and now the light is on so is there a way to make the light in the dash turn off or do you have any pictures on which way the sensors are plugged? say for example that i am on the front drivers side caliper.i am facing the caliper, does the little rubber that protects the wire is supposed to be facing me or is it the plastic sensor supposed to be facing me...? I not sure i am being clear sorry for that if you have any pics or, you do understand what i trying to say, help would be appreciated!


thanks again!

 

you will have to replace it when one breaks light goes on .

 

Mine just snapped onto the new pad with the sensor going down the center of the pad. Let me see if I can find any pics.

 

the small rubber nipple goes down between the pads and the sensor sits on the u slot

 

here's a couple of pics. Hope this helps.
photo.jpg

brakeedit.jpg

 

damn! those pins aren't there anymore.... I'll need to replace it! thanks for the help!

 

Just incase you need it
077.jpg

 

thanks the tips helped a lot!

 

BRAKE SENSOR AT THE DEALERSHIP IN CANADA COSTS $$$$$$!!!!!! I might consider buying them in internet !

 

Can someone buy me one from the MB dealrship or chrysler dealership? I'll send you the money in buy paypal or something like that...? Please? WAYYYYY too expensive to buy it from the dealer in canada .....



Thanks!

 

Why not just leave them off altogether? I do not believe the dash light will come on if you do not install them. I take my wheels off often enough that I would notice the need for changing the brakes before they were completely wore out.

 

pm me your address and ill mail you 1. i have a couple sitting in the garage