Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

BAS/ESP LIGHT ON AFTER INSTALLING HID LIGHT KIT WHY?

Thread Tools
 
Old Jul 17, 2004 | 01:02 PM
  #1 (permalink)  
MAXIMA's Avatar
Thread Starter
Joined: May 2004
Posts: 21
Likes: 0
From: PUERTO RICO
Default BAS/ESP LIGHT ON AFTER INSTALLING HID LIGHT KIT WHY?

AFTER INSTALLING THE HID VERY EASY PLUG & PLAY KIT I AM HAVING THE BAS/ESP LIGHT ON THE PANEL. ANY REASON WHY? THANKS [/b]
 
Reply
Old Jul 17, 2004 | 08:04 PM
  #2 (permalink)  
andrew's Avatar
Administrator
Joined: Nov 2003
Posts: 7,525
Likes: 18
From: Columbus, Ohio
-C-I-C-C-I Associate Member
Default Re: BAS/ESP LIGHT ON AFTER INSTALLING HID LIGHT KIT WHY?

Originally Posted by MAXIMA
AFTER INSTALLING THE HID VERY EASY PLUG & PLAY KIT I AM HAVING THE BAS/ESP LIGHT ON THE PANEL. ANY REASON WHY? THANKS [/b]
what type of kit did you purchase and where? thanks!

sorry to hear about the problems...i want to purchase an hid kit in the future.
 
Reply
Old Jul 18, 2004 | 01:00 AM
  #3 (permalink)  
SeaXfire's Avatar
Joined: Mar 2004
Posts: 191
Likes: 0
From: Seattle
Default

If you disconnected the battery during the installtion (a very good idea) you may have to recallibrate the wheel position sensor. Read the manual it's in there, very simple to do, move the wheel full travel from side to side.
 
Reply
Old Jul 18, 2004 | 10:47 AM
  #4 (permalink)  
saldous's Avatar
Forum Regular
Joined: Jun 2004
Posts: 790
Likes: 0
From: Berkshire, UK
Default

SeaXfire is correct. I had the same problem after I installed the illuminated door sills. Read the manual and it says if the battery was disconnected this problem may occur. Simply move the steering wheel full left lock and then full right lick and back to center. Light goes out.
 
Reply
Old Jul 18, 2004 | 05:35 PM
  #5 (permalink)  
MAXIMA's Avatar
Thread Starter
Joined: May 2004
Posts: 21
Likes: 0
From: PUERTO RICO
Default

andrew, check out bmerfan for HID information. i already installed the HID 8000k that bmerfan posted, and to be honest, its the best $326.00 spent.
 
Reply
Old Jul 19, 2004 | 11:19 AM
  #6 (permalink)  
FerrariVdub's Avatar
Joined: Mar 2004
Posts: 117
Likes: 0
Default Same

My esp ligth doesnt go on the only thing that happened is that when i just put the parking lights on without the headlights on the warning light for Cluster/Lights/Something, it says it in the manual but it looks like ((?)) something like that. Why is it on and how can i not make it come on.
 
Reply
Old Jul 19, 2004 | 07:38 PM
  #7 (permalink)  
Stevo's Avatar
Joined: Mar 2004
Posts: 46
Likes: 0
From: Detroit, Michigan
Default

The BAS/ESP light came on for me too, but the next time I turned the car on it didnt come on... However, the light that signals a light"problem" right near the BAS/ESP stays on at all times... Does it do that for everyone else???
 
Reply
Old Jul 20, 2004 | 02:28 AM
  #8 (permalink)  
english_bob's Avatar
Forum Regular
Joined: May 2004
Posts: 564
Likes: 0
From: Perth, Australia
Default

Stevo,

I've got no warning lights showing. Just the irritating orange glow to remind me I have taken the traction control off.

Wonder if I can change it so the light is on when the traction control is on?
 
Reply
Old Jul 20, 2004 | 09:11 AM
  #9 (permalink)  
FerrariVdub's Avatar
Joined: Mar 2004
Posts: 117
Likes: 0
Default yeah

Steveo thats what i am talking about. The light saying there is a lighting problem comes on only when i put my parking lights on without my headlights, once the headlights are on it goes offf. Why does it go on at all though?????
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
massanu
Crossfire Coupe
35
Feb 20, 2019 07:06 PM
Adrian_X
Exterior & Lighting
83
Nov 9, 2017 08:49 AM
amx1397
Troubleshooting & Technical Questions & Modifications
11
Jan 24, 2016 02:12 PM
UNDER PSI
Crossfire SRT6
3
Jul 18, 2015 02:12 PM
Blackout317
Troubleshooting & Technical Questions & Modifications
4
Jul 7, 2015 08:38 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 09:42 PM.