Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Automatic Tanny Question

Old Feb 20, 2014 | 04:27 PM
  #1 (permalink)  
Muscle-C-Fire's Avatar
Thread Starter
Joined: Dec 2013
Posts: 23
Likes: 0
From: Burlington,NC
Angry Automatic Tanny Question

Hello everyone ...Here is what's going on...Yesterday morning when I left the house going to work...When I got to the first stoplight I stopped and when the light turned green ...there was nothing there Meaning I could give it gas and it wouldn't do anything just idol it would move from the idol rpms..So I idol to a parking lot..stopped put it in park and cut it off....started it back up and everything was back fine...and it didn't do it again til lastnight and it did it again this morning ...But If i manually shift it mean down shift as i slow down it want do it...anyone have a ideal of whats going on with it??..also I don't know if this has anything to do with it..But when I got this car all the side marker bulbs was blowed and when I replaced them the same day this with the tranny happen????
 
Reply
Old Feb 20, 2014 | 07:14 PM
  #2 (permalink)  
PNA's Avatar
PNA
Senior Member
Joined: Aug 2010
Posts: 1,756
Likes: 5
From: Maryland (Central)
Default Re: Automatic Tanny Question

Hard to say. Did you check the tranny fluid? Any visible leaks under the car where you park it? These cars are notorious for having a leaking transmission connector. Right side of tranny under the car. It uuually goes into limp mode -- I believe it stays in second gear. However, your situation sounds different. It could be a computer issue as well. Any check engine lights or codes?
 
Reply
Old Feb 20, 2014 | 07:19 PM
  #3 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,015
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: Automatic Tanny Question

Valve plate needs to be replaced/serviced. Search for "NAG 1"

When it did this to me, there is a hidden/pending code. A dealership can check-for ~ $75.

Sorry, bud.
 
Reply
Old Feb 20, 2014 | 07:41 PM
  #4 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,605
Likes: 38
From: IN
Default Re: Automatic Tanny Question

What Max said.
 
Reply
Old Feb 20, 2014 | 07:49 PM
  #5 (permalink)  
amx1397's Avatar
Senior Member
Joined: Apr 2008
Posts: 6,714
Likes: 453
From: Indialantic Fl./blairsville Ga
Default Re: Automatic Tanny Question

do you have a tune on the ecu? if yes,, that is causing the car to go into limp mode,, it happens most of the time when in a turn and u give it gas. , it is nothing to worry about just get the ecu reflashed by the people you got your tune from,,let them know what it is doing.
by turning off the engine and restart, this resets the ecu.jim
 
Reply
Old Feb 20, 2014 | 08:28 PM
  #6 (permalink)  
PNA's Avatar
PNA
Senior Member
Joined: Aug 2010
Posts: 1,756
Likes: 5
From: Maryland (Central)
Default

Originally Posted by maxcichon
Valve plate needs to be replaced/serviced. Search for "NAG 1"

When it did this to me, there is a hidden/pending code. A dealership can check-for ~ $75.

Sorry, bud.
Yeah, come to think of it they replaced mine under warranty (luckily)
 
Reply
Old Feb 21, 2014 | 02:09 PM
  #7 (permalink)  
Muscle-C-Fire's Avatar
Thread Starter
Joined: Dec 2013
Posts: 23
Likes: 0
From: Burlington,NC
Default Re: Automatic Tanny Question

Originally Posted by amx1397
do you have a tune on the ecu? if yes,, that is causing the car to go into limp mode,, it happens most of the time when in a turn and u give it gas. , it is nothing to worry about just get the ecu reflashed by the people you got your tune from,,let them know what it is doing.
by turning off the engine and restart, this resets the ecu.jim
No it hasn't been tuned ...Not unless it was tuned before I got it....
 
Reply
Old Feb 21, 2014 | 02:10 PM
  #8 (permalink)  
Muscle-C-Fire's Avatar
Thread Starter
Joined: Dec 2013
Posts: 23
Likes: 0
From: Burlington,NC
Default Re: Automatic Tanny Question

Thanks Max.....So by saying Valve Plate is that also the Valve Body??.....I'll get my buddy to see with his PC
 
Reply
Old Feb 21, 2014 | 02:47 PM
  #9 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,015
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: Automatic Tanny Question

That's it. I had mine replaced last year. Can be $$$. It's a well-known problem and you find all kinds of stories/info with a Google search.

Max
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TerryR
Cars For Sale - Archive
13
Dec 13, 2019 03:27 PM
jimf
Troubleshooting & Technical Questions & Modifications
11
Oct 10, 2015 10:22 AM
Charlesl
All Crossfires
12
Sep 30, 2015 10:46 PM
brandoni
Crossfire SRT6
3
Sep 30, 2015 07:48 PM
DaveMe
U.K.
2
Sep 29, 2015 08:09 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


All times are GMT -4. The time now is 02:36 AM.