Need help - Crossfire won't start
Thread Starter
|
Senior Member
Joined: Mar 2011
Posts: 3,906
Likes: 15
From: TN
Re: Need help - Crossfire won't start
Yeap, it's definitely a great feeling to have it up and running. My enjoyment was short lived on day one due to a bad heat exchanger pump. That was replaced today, so I took it out for some spirited runs to check the boost and IAT's. The air temps were incredible with the huge heat exchanger and working pump, but the power and boost aren't there. Max boost was just under 15 psi, so I've got either, belt slip, pulley slip, or a boost leak. I'll be digging in tonight once the engine cools off.
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: Need help - Crossfire won't start
Yeap, it's definitely a great feeling to have it up and running. My enjoyment was short lived on day one due to a bad heat exchanger pump. That was replaced today, so I took it out for some spirited runs to check the boost and IAT's. The air temps were incredible with the huge heat exchanger and working pump, but the power and boost aren't there. Max boost was just under 15 psi, so I've got either, belt slip, pulley slip, or a boost leak. I'll be digging in tonight once the engine cools off.
Finally running, now you got to monkey around with it till it quits again
Forum Regular
Joined: Nov 2007
Posts: 488
Likes: 9
From: Port Coquitlam, BC
Re: Need help - Crossfire won't start
SOS diagnostics S.O.S. Diagnostics
Rob @ Needswings https://www.needswings.com/crossfire-skreem-repair
Either can fix a SKREEM problem!
Rob @ Needswings https://www.needswings.com/crossfire-skreem-repair
Either can fix a SKREEM problem!
