Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Starts but does immediately

Thread Tools
 
Old Sep 28, 2018 | 08:32 PM
  #1 (permalink)  
Imbubba's Avatar
Thread Starter
Joined: Sep 2018
Posts: 4
Likes: 0
From: Iowa
Default Starts but does immediately

I recently purchased a 05 Crossfire,the guy I bought it from drove thru a big puddle of water and it sucked water into the intake,needless to say the motor was trashed,but it still ran. I bought an engine and installed it,now I can't get it to start,I'm having alot of them same symptoms as everyone else,keyfob doesn't work,no alarm sounding off though,trunk locked,anyways,all I did was swap an engine from a running car,and now it wont start,have to keep resetting the computer to get to crank just to get it to start for about one or two seconds. Any help would be greatly appreciated.
 
Reply
Old Sep 29, 2018 | 07:46 AM
  #2 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Starts but does immediately

You didn't happen to swap any of the modules in the black box by the battery, did you ?
 
Reply
Old Sep 29, 2018 | 10:11 AM
  #3 (permalink)  
Imbubba's Avatar
Thread Starter
Joined: Sep 2018
Posts: 4
Likes: 0
From: Iowa
Default Re: Starts but does immediately

No I did not. The only thing I did in the black box was disconnect the wire harnesses for the engine.
 
Reply
Old Sep 29, 2018 | 11:27 AM
  #4 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Starts but does immediately

Originally Posted by Imbubba
No I did not. The only thing I did in the black box was disconnect the wire harnesses for the engine.
OK, was asking cause the SKREEM and PCM have to know each other.
The symptoms you described are SKREEM synptoms.
 
Reply
Old Sep 29, 2018 | 11:54 AM
  #5 (permalink)  
Imbubba's Avatar
Thread Starter
Joined: Sep 2018
Posts: 4
Likes: 0
From: Iowa
Default Re: Starts but does immediately

Originally Posted by ala_xfire
OK, was asking cause the SKREEM and PCM have to know each other.
The symptoms you described are SKREEM synptoms.
Does that mean I need to replace the SKREEM module,and if so,where can I find an affordable one?
 
Reply
Old Sep 29, 2018 | 04:38 PM
  #6 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Starts but does immediately

You can source the SKREEM from Rob at Needswings, but in your case I would advise trying to contact him first and get his opinion on your situation.
  • 1-586-531-1413 10am-5pm EST
 
Reply
Old Sep 29, 2018 | 06:40 PM
  #7 (permalink)  
Imbubba's Avatar
Thread Starter
Joined: Sep 2018
Posts: 4
Likes: 0
From: Iowa
Default Re: Starts but does immediately

Originally Posted by ala_xfire
You can source the SKREEM from Rob at Needswings, but in your case I would advise trying to contact him first and get his opinion on your situation.
  • 1-586-531-1413 10am-5pm EST
I will certainly give him a call,I truly do appreciate your assistance with my problem. I will report back to let you know what I find out,thanks again.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BlazingSaddle
Crossfire Coupe
42
Jun 6, 2019 09:18 PM
DarksideXF
Troubleshooting & Technical Questions & Modifications
13
May 30, 2019 11:02 AM
Truesy
Troubleshooting & Technical Questions & Modifications
10
Oct 4, 2018 10:50 PM
PNA
All Crossfires
17
Mar 11, 2018 05:43 PM
mikerose
Troubleshooting & Technical Questions & Modifications
8
Aug 23, 2011 08:23 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 04:49 PM.