spoiler linked to which wheel sensor
this thread has been for some time: https://www.crossfireforum.org/forum...ctivation.html
my doubt is regarding post 7. he says: The wing is activated / de-activated through the front wheel speed sensor circuit
but for all that i know, there are 2, so, which 1? left or right?
thanks
my doubt is regarding post 7. he says: The wing is activated / de-activated through the front wheel speed sensor circuit
but for all that i know, there are 2, so, which 1? left or right?
thanks
this thread has been for some time: https://www.crossfireforum.org/forum...ctivation.html
my doubt is regarding post 7. he says: The wing is activated / de-activated through the front wheel speed sensor circuit
but for all that i know, there are 2, so, which 1? left or right?
thanks
my doubt is regarding post 7. he says: The wing is activated / de-activated through the front wheel speed sensor circuit
but for all that i know, there are 2, so, which 1? left or right?
thanks
.
the way i interpret this ("the four wheel speed sensors from the CAB") is:
1- that all four sensors must be functioning right, and
2-that it can take readings from anyone.
in other words, that if any of the four sensors is malfunctioning, the spoiler will go weird.
please correct me if am wrong.
but, in my case, as the CAB is performing fine, then all four sensors are doing fine. right?
then must be another reason for my spoiler doing bad.
what could be? the battery is new and the volts readings are fine, i installed the ground as per pizzaguy, replaced the crankcase and crankshaft sensors with bosch oem ....
1- that all four sensors must be functioning right, and
2-that it can take readings from anyone.
in other words, that if any of the four sensors is malfunctioning, the spoiler will go weird.
please correct me if am wrong.
but, in my case, as the CAB is performing fine, then all four sensors are doing fine. right?
then must be another reason for my spoiler doing bad.
what could be? the battery is new and the volts readings are fine, i installed the ground as per pizzaguy, replaced the crankcase and crankshaft sensors with bosch oem ....
Last edited by phil alvirez; Feb 16, 2020 at 05:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Chiminoul
Crossfire SRT6
23
Nov 14, 2015 10:40 PM
pizzaguy
Troubleshooting & Technical Questions & Modifications
6
May 23, 2014 07:33 PM
boboridesbmx
Engine, Exhaust, Transmission and Differential
21
Feb 24, 2012 06:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



