Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Low Coolant Light/When Fan turned on weird motor noise

Thread Tools
 
Old Oct 11, 2020 | 01:30 PM
  #1 (permalink)  
Cryfire's Avatar
Thread Starter
Joined: Oct 2020
Posts: 2
Likes: 0
From: SC
Default Low Coolant Light/When Fan turned on weird motor noise

I own a 2004 Chrysler Crossfire and this weekend I noticed the low Coolant Light flashing and it turns on and off every once and awhile. It doesn't turn on right when I start the car only when Temp guage shows about half or barely above the middle tick. then I also tried to turn on the air and the fan motor is making a weird noise that is consistent with how fast it's spinning. Any help with what the actual problem could be and or how to troubleshoot
 
Reply
Old Oct 11, 2020 | 02:36 PM
  #2 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,581
Likes: 762
From: Orange County CA.
Default Re: Low Coolant Light/When Fan turned on weird motor noise

Have you checked your coolant level in the resavoir?
 
Reply
Old Oct 11, 2020 | 02:44 PM
  #3 (permalink)  
Cryfire's Avatar
Thread Starter
Joined: Oct 2020
Posts: 2
Likes: 0
From: SC
Default Re: Low Coolant Light/When Fan turned on weird motor noise

Originally Posted by ZERACER
Have you checked your coolant level in the resavoir?
Insanely new at trying to figure things out like that with cars how do I go about that and what's a good indicator. I know where the coolant reservoir is at and how to fill coolant but not check level
 
Reply
Old Oct 11, 2020 | 03:23 PM
  #4 (permalink)  
zip439's Avatar
Senior Member
Joined: Jul 2010
Posts: 2,219
Likes: 438
From: SE Alabama
Default Re: Low Coolant Light/When Fan turned on weird motor noise

Use Zerex 50/50 pre-mixed anti freeze and bring the coolant level up to about 3/4 to a 1/2 inch of the black reservoir top when viewed from the side. You can see the liquid level thru the white colored plastic. You can also look down through the fill top and see a whit plastic rib in the rear of the reservoir. The top of the rib should remain visible above the coolant level.
 
Reply
Old Oct 11, 2020 | 03:31 PM
  #5 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Low Coolant Light/When Fan turned on weird motor noise

Originally Posted by zip439
Use Zerex 50/50 pre-mixed anti freeze and bring the coolant level up to about 3/4 to a 1/2 inch of the black reservoir top when viewed from the side. You can see the liquid level thru the white colored plastic. You can also look down through the fill top and see a whit plastic rib in the rear of the reservoir. The top of the rib should remain visible above the coolant level.
The top of that post is the level of the coolant when cold in a perfect world. If the post was to remain visible above the coolant level you would need a dimension like 1” or someone could say they could see the whole post and think that was fine.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
geogramps
Engine, Exhaust, Transmission and Differential
7
Aug 22, 2018 04:58 AM
sweetjamesjoness
Crossfire Coupe
34
Mar 30, 2018 04:46 PM
Skip19
Troubleshooting & Technical Questions & Modifications
18
Feb 1, 2018 08:22 AM
chevyboyac
Engine, Exhaust, Transmission and Differential
4
Aug 5, 2016 10:33 PM
ThatSweetSRT6
Crossfire SRT6
22
Dec 9, 2011 09:20 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:46 PM.