Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Sticky key fix now no ignition

Thread Tools
 
Old Nov 2, 2020 | 12:39 PM
  #1 (permalink)  
meh03's Avatar
Thread Starter
|
Forum Regular
Joined: May 2010
Posts: 488
Likes: 5
From: Austin, TX
Default Sticky key fix now no ignition

I did the sticky key fix yesterday and now the key turns fine but the car will not start. Will not crank, no ignition. I replaced the car battery that was shot since it has been sitting for a while. The rest of the electronics work fine. I failed to look at where the key ring was before removing it (around the key hole that communicates with the FOB) but I reinstalled it with the wire at the bottom as a youtube video said. I will pick up a new battery for the FOB just in case.

Any ideas? Any help is greatly appreciated.

Thanks
 
Reply
Old Nov 2, 2020 | 01:22 PM
  #2 (permalink)  
meh03's Avatar
Thread Starter
|
Forum Regular
Joined: May 2010
Posts: 488
Likes: 5
From: Austin, TX
Default Re: Sticky key fix now no ignition

I did some forum searching. Sounds like it might be the RCM. I'll pull it tonight and take a look.
 
Reply
Old Nov 2, 2020 | 02:44 PM
  #3 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,631
Likes: 776
From: Orange County CA.
Default Re: Sticky key fix now no ignition

Was it starting right before the sticky key fix?
 
Reply
Old Nov 2, 2020 | 02:55 PM
  #4 (permalink)  
meh03's Avatar
Thread Starter
|
Forum Regular
Joined: May 2010
Posts: 488
Likes: 5
From: Austin, TX
Default Re: Sticky key fix now no ignition

Originally Posted by ZERACER
Was it starting right before the sticky key fix?

It was if I kept trying several times and was getting worse and worse. I thought that also had to do with the sticky key problem. No?
 
Reply
Old Nov 2, 2020 | 04:52 PM
  #5 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,631
Likes: 776
From: Orange County CA.
Default Re: Sticky key fix now no ignition

You are correct, sounds like your RCM. You can send it to DJ Tighe for rebuild. Do a search of RCM on this site.
 
Reply
Old Nov 2, 2020 | 05:24 PM
  #6 (permalink)  
meh03's Avatar
Thread Starter
|
Forum Regular
Joined: May 2010
Posts: 488
Likes: 5
From: Austin, TX
Default Re: Sticky key fix now no ignition

Thanks. I ordered a new one. Once I swap it out, if that's the problem, I'll send the old one to him for repair and throw that in the glove box as a spare next to the spare CPS sensor. Gotta love the electrical on these cars
 
Reply
Old Nov 2, 2020 | 05:31 PM
  #7 (permalink)  
KDW4Him's Avatar
Senior Member
Joined: Nov 2011
Posts: 1,287
Likes: 29
From: Alma, MI
Default Re: Sticky key fix now no ignition

Originally Posted by meh03
I will pick up a new battery for the FOB just in case.
Battery for the FOB only has to do with remote lock/unlock function.

The most common issue for no start after sticky key work is ring not replaced around key hole or ring wire came unplugged from SKREEM.
 

Last edited by KDW4Him; Nov 2, 2020 at 05:35 PM.
Reply
Old Nov 2, 2020 | 05:34 PM
  #8 (permalink)  
KDW4Him's Avatar
Senior Member
Joined: Nov 2011
Posts: 1,287
Likes: 29
From: Alma, MI
Default Re: Sticky key fix now no ignition

Originally Posted by meh03
It was if I kept trying several times and was getting worse and worse. I thought that also had to do with the sticky key problem. No?
Start/crank issues are not a sticky key issue symptom. Specifically if the car would crank and not start it's the CPS. If it wouldn't crank at all it's the RCM.
 
Reply
Old Nov 2, 2020 | 08:55 PM
  #9 (permalink)  
pizzaguy's Avatar
Administrator
Joined: Jun 2009
Posts: 13,964
Likes: 1,291
From: Fort Worth, Texas
Default Re: Sticky key fix now no ignition

We had a private conversation, I think we got to the bottom of this and he's on the right track, everyone.
 
Reply
Old Nov 2, 2020 | 10:35 PM
  #10 (permalink)  
meh03's Avatar
Thread Starter
|
Forum Regular
Joined: May 2010
Posts: 488
Likes: 5
From: Austin, TX
Default Re: Sticky key fix now no ignition

Yep. Thanks everyone. I’ll update once I get the new RCM and hopefully close this one out.
 
Reply
Old Nov 9, 2020 | 02:50 PM
  #11 (permalink)  
meh03's Avatar
Thread Starter
|
Forum Regular
Joined: May 2010
Posts: 488
Likes: 5
From: Austin, TX
Default Re: Sticky key fix now no ignition

Replacing the RCM fixed it. Fired right up. Thanks to all!
 
Reply
Old Nov 9, 2020 | 03:17 PM
  #12 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,631
Likes: 776
From: Orange County CA.
Default Re: Sticky key fix now no ignition

Thanks for the follow up, so many do not.
 
Reply
Old Nov 10, 2020 | 12:58 PM
  #13 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,487
Likes: 853
From: Upstate SC
Default Re: Sticky key fix now no ignition

Originally Posted by meh03
Replacing the RCM fixed it. Fired right up. Thanks to all!
I was extremely lucky. When the RCM went bad in my 2007, the car was sitting in my driveway. Like you, I bought a new RCM from RockAuto & sent the old one to Tighe for repair. Now I have a spare RCM.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
treyleblanc
Crossfire Coupe
47
Sep 17, 2024 06:26 PM
barrysmith
Troubleshooting & Technical Questions & Modifications
5
Jan 8, 2019 04:53 PM
fastfred
Crossfire SRT6
60
Nov 5, 2018 09:47 AM
tracyclifton
Crossfire Coupe
28
Oct 18, 2016 04:15 PM
Dennis B
All Crossfires
6
May 30, 2014 07:02 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 04:14 AM.