Hello,

after 4 years of development and almost 2 years of testing I am proud to have the final version of my Skreemulator ready. At this point I would like to thank the beta testers who trusted me to test such an important component in an early version of mine.

What can the Skreemulator do?
It completely replaces the Skreem module (immobilizer) and also the central locking is controlled by the Skreemululator, the alarm module still works.
No Chrysler/Mercedes radio keys with transponder are needed anymore, a simple mechanical key like any locksmith can make is enough.

What can the OLED display do?
Standard display open/close, number of codes sent, code accepted, any error messages.
Display of speed, rpm, water temperature, engine oil temperature, transmission oil temperature, gear indicator with display of driving program, tank level in gallons, remaining range (roughly estimated), current consumption (roughly estimated).
Warning for too high water, engine oil or transmission oil temperature.

What changes in contrast to the original Skreem module?
the original radio key can no longer open/close the Crossfire this is done with the radio remote control of the included central locking module.
the transponder of the original radio key is no longer needed.

For whom is the Skreemulator?
First of all of course for everyone who has a defective Skreem module, then maybe for someone who wants to have his still working Skreem module (or the Skreemulator) as a replacement.
Finally, of course, for anyone who would like to have more information displayed.
The Skreemulator is available from me now.

I want to have a Skreemulator, what do I have to do?

Rudy (a long member of this forum username rcompart) will make the distribution and service.

Skreemulator with ECU Programming (CONUS ground shipping)
PAYPAL

Skreemulator with OLED Display and ECU Programming (CONUS ground shipping)
PAYPAL

Skreemulator with ECU programming (INTL shipping)
PAYPAL

Skreemulator with OLED Display and ECU programming (INTL shipping)
PAYPAL

Here is the manual, where everything is explained in detail: Manual

This is the scope of delivery:

Skreemulator:




Skreemulator with OLED display:



The display is installed here:



The trip meter is unfortunately no longer visible after installation.

Creation of the Skreemulator

Greetings, Andre

 

Andre,
Congratulations on your accomplishment,and thank you for your long term dedication to the Crossfire community. These are great solutions for the Skeem problems on our cars.
One question,, I understand that they must be communication between the engine control unit (ECU) and skeemulator to start the vehicle. My question is, do you need the ECU for physical modifications or just programming?
Thank you and great work.
.

 

The ECU will only need for programming, no modification will be made.
As I sayed, I found also a way, that after this programming the original Skreem and the Skreemulator works.

 

Hi, I am having issues with my car unlocking. Should this be able to fix it? My car's vacuum pump, key fob are working but my mechanic says the SKREEM module is the issue. Also, do you offer any sort of warranty or guarantee with your work?

 

Hi,
if the fault is really from the Skreem, my Skreemulator will fix it, but as there can be other problems like CAN bus errors, a defective BCM or defective wires there is no warranty that the Skreemulator will fix your problem.
Of course I give a warranty that the Skreemulator works but your ECU has to be programmed, so Rudy has to invest work in programming and testing, so I can't take all back if your problem with the locking system still exists.

 

Hi, can I get your contact info?

 

You have a PM.