Bad Idler Pully
More issues as always, fixed my skreem problem drove the car two miles down the road and the idler pully completely came off the car and flew down the road throwing the belt. I instantly pulled over and shut the car off then had it towed home. Does anyone have any information on replacing this? I'm going to upload a picture of whats left I cant tell if there is an old sleeve from the bearing still there or not.
It is hard to say what caused this, but Needswings sent u a link for each pulley take his links to the upmost
and he will send u the correct parts . jim
and he will send u the correct parts . jim
More issues as always, fixed my skreem problem drove the car two miles down the road and the idler pully completely came off the car and flew down the road throwing the belt. I instantly pulled over and shut the car off then had it towed home. Does anyone have any information on replacing this? I'm going to upload a picture of whats left I cant tell if there is an old sleeve from the bearing still there or not.
Here's a post I did on replacing the idler pulley, the belt tensioner and belt.
NOTE: If you have an automatic transmission you will not have the damper shock on the tensioner pulley. That is for manual transmissions only.
Hopefully this will be helpful:
LINK to Idler, belt and tensioner replacement
Thread
Thread Starter
Forum
Replies
Last Post
UNDER PSI
Troubleshooting & Technical Questions & Modifications
4
Aug 1, 2015 02:11 AM
Aloewy
Engine, Exhaust, Transmission and Differential
10
Dec 8, 2013 04:48 PM
Bubba89
Crossfire SRT6
6
Jul 28, 2009 12:04 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



