Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

rcm failure ?

Thread Tools
 
Old Jun 17, 2026 | 10:40 PM
  #1 (permalink)  
michaelleewebb's Avatar
Thread Starter
Joined: Jun 2026
Posts: 14
Likes: 7
Default rcm failure ?

lordy, lordy, lordy. i almost made it though a whole day without anything breaking but alas no luck. this problem actually began a few days ago but i wrote it off to me trying to incorrectly start the car, like maybe i have to have my foot on the brake to start it or something like that. but i no longer think that is the case. here's what its doing, i place the key in the ingistion and turn it one click, everything lights up as it should, then i turn it to crank the starter and nothing happens. after that i have to turn the key all the way back in order to try again. at first it only did this once and would start on the 2nd try but now it's getting worst. from what i read on this forum this appears to be the rcm failing. i have read the how-to and i believe i can fix it. can someone confirm my suspicions ? i need to get this fixed and the wing and the funny noise problem soon, we all know that i will soon be SKEEMING !
 
Reply
Old Jun 18, 2026 | 11:34 AM
  #2 (permalink)  
tighed1's Avatar
Senior Member
Joined: Aug 2008
Posts: 5,743
Likes: 99
From: Sierra Vista, Arizona
Default Re: rcm failure ?

Send me your RCM and I'll rebuild it to BETTER than new condition. Email me, tighed1@hotmail.com for the details.

Hundreds have and their RCM troubles are over!
 

Last edited by tighed1; Jun 18, 2026 at 11:35 AM.
Reply
Old Jun 18, 2026 | 12:14 PM
  #3 (permalink)  
michaelleewebb's Avatar
Thread Starter
Joined: Jun 2026
Posts: 14
Likes: 7
Default Re: rcm failure ?

what is the cost ? i think a read somewhere that it was 50 dollars.
 
Reply
Old Jun 18, 2026 | 12:14 PM
  #4 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,656
Likes: 779
From: Orange County CA.
Default Re: rcm failure ?

If it fails to start, you always have to turn the key off and start over. Getting the rebuild is the way to go and always carry a spare RCM, the relays wear out.
 
Reply
Old Jun 18, 2026 | 12:20 PM
  #5 (permalink)  
michaelleewebb's Avatar
Thread Starter
Joined: Jun 2026
Posts: 14
Likes: 7
Default Re: rcm failure ?

have you considered adding a voltage regulator and replacing the relays with ssr's ? the voltage regulator will keep the voltage stable (no spikes) the ssr's should then last forever.
 
Reply
Old Jun 18, 2026 | 03:32 PM
  #6 (permalink)  
michaelleewebb's Avatar
Thread Starter
Joined: Jun 2026
Posts: 14
Likes: 7
Default Re: rcm failure ?

looks like the issue is with the clutch switch. if i press it down normally the car won't start. if i press it down very hard it does start. i've ordered a new clutch switch. should be here next week.
 
Reply
Old Jun 18, 2026 | 05:00 PM
  #7 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,656
Likes: 779
From: Orange County CA.
Default Re: rcm failure ?

didn't realize it was a stick shift. Good job.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rhomohr
Troubleshooting & Technical Questions & Modifications
16
Nov 24, 2025 01:20 AM
kerrycrossfire
Troubleshooting & Technical Questions & Modifications
3
Aug 16, 2024 07:45 PM
UnaidedPizza
Troubleshooting & Technical Questions & Modifications
30
Mar 5, 2023 10:14 PM
Skywriter
All Crossfires
4
Jul 14, 2019 07:33 PM
AlexParra
Crossfire Coupe
4
Dec 29, 2016 06:17 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:04 PM.