how to program door opener?
Re: how to program door opener?
Welcome to the forum. You will love your car and find this to be a fantastic forum.
The definitive source for manuals is here:
https://www.crossfireforum.org/forum...ollection.html
Chrysler's site for manuals - including free owner manaul down loads - can be found here:
My Chrysler: Chrysler Owners Service Manuals - Chrysler Cars, Minivans, SUVs, Convertibles, Crossovers
Homelink instructions - how you program the opener - are also here:
HomeLink Training Instructions
The definitive source for manuals is here:
https://www.crossfireforum.org/forum...ollection.html
Chrysler's site for manuals - including free owner manaul down loads - can be found here:
My Chrysler: Chrysler Owners Service Manuals - Chrysler Cars, Minivans, SUVs, Convertibles, Crossovers
Homelink instructions - how you program the opener - are also here:
HomeLink Training Instructions
Senior Member
Join Date: Sep 2006
Location: N.E. Wisconsin
Age: 70
Posts: 1,984
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to program door opener?
It works very well though it doesn't have the range of the door openers that came with my door. Programming isn't to difficult as long as you follow the instructions though I did have to "teach" my door motor the new codes, a step I was hoping I wouldn't have to do (Get out a ladder, find the button, etc., etc.).
That being said, it's a snap overall & pretty downright convienient!
That being said, it's a snap overall & pretty downright convienient!
Join Date: Jun 2009
Location: Fort Worth, Texas
Age: 64
Posts: 13,458
Received 885 Likes
on
689 Posts
Re: how to program door opener?
This was the FIRST thing I did when I brought my car home.
Totally easy.
Pushed the outer two buttons until the light begins to flash (to clear the memory of all buttons.)
THEN - while holding your existing remote next to the overhead -
Pressed the desired button on the overhead AND the button of my existing garage remote until the light in the remote flashes and speeds up.
DONE! Worked first time! (Unlike my first marriage).
Totally easy.
Pushed the outer two buttons until the light begins to flash (to clear the memory of all buttons.)
THEN - while holding your existing remote next to the overhead -
Pressed the desired button on the overhead AND the button of my existing garage remote until the light in the remote flashes and speeds up.
DONE! Worked first time! (Unlike my first marriage).
Join Date: Aug 2009
Location: Warner Robins, GA
Age: 63
Posts: 3,459
Likes: 0
Received 8 Likes
on
7 Posts
Join Date: Sep 2005
Location: Brookeville, Maryland
Age: 73
Posts: 2,700
Likes: 0
Received 1 Like
on
1 Post
Re: how to program door opener?
I'm glad you guys had an easy time of it because I tried the day I got my car way back in July of 2005. I think I finally got the damn thing to work in July of 2008. I followed the directions to a letter and could not get it to work then one day it works??
Now if I can only get my wifes car to work, basically the same system, its a Mercedes.
Now if I can only get my wifes car to work, basically the same system, its a Mercedes.
Join Date: Aug 2009
Location: Warner Robins, GA
Age: 63
Posts: 3,459
Likes: 0
Received 8 Likes
on
7 Posts
Re: how to program door opener?
Originally Posted by patpur
I'm glad you guys had an easy time of it because I tried the day I got my car way back in July of 2005. I think I finally got the damn thing to work in July of 2008. I followed the directions to a letter and could not get it to work then one day it works??
Now if I can only get my wifes car to work, basically the same system, its a Mercedes.
Now if I can only get my wifes car to work, basically the same system, its a Mercedes.
Thread
Thread Starter
Forum
Replies
Last Post
tcar32909
Troubleshooting & Technical Questions & Modifications
0
09-19-2015 03:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)