I have posted this problem in the past where my srt the check engine would inadvertently come on and not allow the car to shift at certain times. When this occurred in the past, and I was able to get it to reset by turning the engine off then back on and if that didn't work, I could get it to work again of unplugging the battery. This would also reset the check engine light. I was told here that it was probably the inter cooler pump which I then changed and made no difference. Now the check engine light has come on and it feels like I have no power and in the drive position it wont shift or allow me to manually downshift Any ideas? Thanks Mike

 

Have you looked for any codes that may have been set?

 

Yes P0715 Input/turbine speed sensor. Looking for one now

 

What you need to look for is a 722.6 "conductor plate" replacement kit. FCPEuro offers one and several on eBay.
I think Rob at needswings.com also has them.

 

Thank u Bigtime! Looks like I can install except for the computer downloads. Is that correct?

 

Computer download?
The TCM does NOT need to be upgraded.

 

I have read that I will need to have the transmission error codes removed and the computer reset. This correct

 

Yes, any TCM error codes will need to be reset.
This can be accomplished with any number of inexpensive code readers.
I have this one and know it works :


but there are quite a few cheaper ones.

Bottom line, don't pay a dealer to do it.