What did you do to your Crossfire today?
Senior Member
Joined: Jul 2015
Posts: 953
Likes: 7
From: Greensburg, PA
Re: What did you do to your Crossfire today?
Vertical Doors called and wanted me to come in so they could fix the complains that I had reported to them about their installation of the Lambo doors the owner worked on my XF fixed the thinga that I had complained about took about 5 hours haven't time to check it all out but the passenger door was my biggest complain and now that is fixed.
Joined: Mar 2010
Posts: 247
Likes: 32
From: Alaska
Re: What did you do to your Crossfire today?
I'm not sure I ever noticed these before, but I found four of these behind the seats. I couldn't find anything in the owners manual or with the search function and could use some clarification if this is the international sign for "Don't drink and drive" or if they're indicating that carrying wine bottles behind the seats is foreboding. 
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 185
From: Lineville, AL
Re: What did you do to your Crossfire today?
Just $9.99 for 32oz bottle HERE.....
303 Aerospace Vinyl Protectant | PontoonStuff.com
303 Aerospace Vinyl Protectant | PontoonStuff.com
While on the above site, I saw these :
650 Lumen Blue Underwater LED | PontoonStuff.com
Stailless steel, be great for under dash or under car lighting !
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: What did you do to your Crossfire today?
Shucks ! Darn. Just goes to show, never stop looking.
While on the above site, I saw these :
650 Lumen Blue Underwater LED | PontoonStuff.com
Stailless steel, be great for under dash or under car lighting !
While on the above site, I saw these :
650 Lumen Blue Underwater LED | PontoonStuff.com
Stailless steel, be great for under dash or under car lighting !
Unless it is to be "underwater" as stated for cooling reasons.. Put high powered "drain plug" lights in the center toon on our boat.. Instructions noted "no more than 10 seconds out of water when lit"..
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 185
From: Lineville, AL
Re: What did you do to your Crossfire today?
Surface or transom mount thanks to our unique overheat protection that allows you to use this light out of water.
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: What did you do to your Crossfire today?
Well there ya go.. hit "buy now" and you can show them off at the Dragon! 
Senior Member
Joined: Jul 2015
Posts: 953
Likes: 7
From: Greensburg, PA
Re: What did you do to your Crossfire today?
I'm not sure I ever noticed these before, but I found four of these behind the seats. I couldn't find anything in the owners manual or with the search function and could use some clarification if this is the international sign for "Don't drink and drive" or if they're indicating that carrying wine bottles behind the seats is foreboding.
Joined: Sep 2014
Posts: 174
Likes: 2
From: hemet, calif.
Re: What did you do to your Crossfire today?
The doors open a little wider so I don't always have to lift up the doors fit better and the fenders are aligned good, I had thought about having them taken off but I spent too much $$ to to ake them off so I eill just live with them .
Senior Member
Joined: Jun 2012
Posts: 2,875
Likes: 32
From: Key Largo FL . . . The fabulous Florida Keys
Re: What did you do to your Crossfire today?
See you at the dragon!
Last edited by RED DOG; Sep 18, 2015 at 06:25 AM.
Senior Member
Joined: Mar 2010
Posts: 1,157
Likes: 1
From: midwest
Re: What did you do to your Crossfire today?
Changed the brake light switch ! ESP/BAS light came on dash then found out no brake lights ! Not a hard job to replace yet nothing easy either on these cars ! Just glad I got the part & put it in myself ! Always good to do it your self !!!
Forum Regular
Joined: Feb 2013
Posts: 723
Likes: 1
From: Cincinnati, Ohio
Re: What did you do to your Crossfire today?
Took mine to a local cruise last night, really enjoyed the evening. Spent about two and a half hours there, a lot of people checking out the car and asking questions. It's billed as the largest weekly cruise in southwestern Ohio, I just wish it was a little closer to where I live.
Administrator / Senior Member / Retired
Joined: Jul 2007
Posts: 18,129
Likes: 1,612
From: Aurora , ILL
Re: What did you do to your Crossfire today?
On Wednesday....
New set of Bosch spark plugs in my 2004 since I just reached 100,000 miles
The old (original) ones didn't look bad at all
New set of Bosch spark plugs in my 2004 since I just reached 100,000 miles
The old (original) ones didn't look bad at all
Joined: Dec 2014
Posts: 217
Likes: 4
From: SW Ohio
Re: What did you do to your Crossfire today?
Joined: Oct 2014
Posts: 10
Likes: 0
From: Arizona
Re: What did you do to your Crossfire today?
I've just installed a replacement grille and hood emblem, and did the cabin air filter today. Still need to vacuum up all the crap that fell out when I pulled the old one.
(Before)(crappy mesh grille attached w/ rusty wire)K7gsJ0s.jpg
(After)rQ8IvIt.jpg
(Before)(crappy mesh grille attached w/ rusty wire)K7gsJ0s.jpg
(After)rQ8IvIt.jpg
Last edited by Ky06coupe; Sep 19, 2015 at 06:11 PM. Reason: Adding before picture
Senior Member
Joined: Jul 2009
Posts: 6,372
Likes: 810
From: Central South Carolina
Re: What did you do to your Crossfire today?
Just an update, the flashing center mounted brake light module install is still working GREAT! I got a comment from a Deputy Sheriff just the other day that these modules grab the attention of people behind you who are distracted. The Deputy asked me where I got mine from, I told him 'ebay'. He is going to look into getting one on his personal vehicle. Now that's a pretty good endorsement! .
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: What did you do to your Crossfire today?
Just an update, the flashing center mounted brake light module install is still working GREAT! I got a comment from a Deputy Sheriff just the other day that these modules grab the attention of people behind you who are distracted. The Deputy asked me where I got mine from, I told him 'ebay'. He is going to look into getting one on his personal vehicle. Now that's a pretty good endorsement! .
Joined: Sep 2014
Posts: 174
Likes: 2
From: hemet, calif.
Re: What did you do to your Crossfire today?
I had 1 on chevy HHR for 5 years and it did get attention. have ordered one for my XF will be here this week.
Last edited by jayloukakis@hotmail.com; Sep 21, 2015 at 09:32 PM. Reason: that I have just bbought one.
Senior Member
Joined: Jul 2009
Posts: 6,372
Likes: 810
From: Central South Carolina
Re: What did you do to your Crossfire today?
OK, had a little distracting bug in my glove box light, only lighting on occasion. I found the switch plunger was sticking. I read the service manual and quickly was able to 'pop' out the assembly with a trim stick where it illustrated it in the manual. Upon disconnecting the TWO sets of wires, I found the plastic to plastic rubbing was very rough. I took a toothpick with a little dab of petroleum jelly, and put a spot of it on the plunger where it slid against the metal and plastic below it. I also added a small dab to the switch/plunger contact point and now it is smooth as can be. Reassembly, and now every time I open the glove box (when the iggy is on) the lamp lights brightly. Glad I fixed this, it was just so annoying at times. .
Last edited by GraphiteGhost; Sep 20, 2015 at 04:18 PM.