Crossfire Keys
Senior Member
Joined: Sep 2007
Posts: 2,271
Likes: 7
From: Middleboro, MA
Re: Crossfire Keys
The dealer or maybe this place. https://www.remotesandkeys.com/Produ...ductCode=3191A
Last edited by robby363; Apr 25, 2010 at 05:54 PM.
Senior Member
Joined: Mar 2010
Posts: 1,363
Likes: 2
From: Sun City West, AZ
Re: Crossfire Keys
I just got a new key fob from my dealer last week.. $146.00 ...... took 3 days. Dealer said it didn't have to go to Germany. Came out of Texas. Had to have your Vin #. Still needed to do the simple programing instructed on this forum for free, to open and lock doors and panic button. Dealer said their charge to do that program was $45. Save the $$$ do it yourself! Ebay keys don't work.
Re: Crossfire Keys
Originally Posted by IBLUBYU
I just got a new key fob from my dealer last week.. $146.00 ...... took 3 days. Dealer said it didn't have to go to Germany. Came out of Texas. Had to have your Vin #. Still needed to do the simple programing instructed on this forum for free, to open and lock doors and panic button. Dealer said their charge to do that program was $45. Save the $$$ do it yourself! Ebay keys don't work.
I bought eBay keys for the casing, switched out the transponder/key, but not the motherboard. It starts the car fine, and unlocks it with the door handle, but I cannot for the life of me seem to program it for the buttons to work.
Senior Member
Joined: Jul 2006
Posts: 3,610
Likes: 3
From: Lebanon, Tennessee
Re: Crossfire Keys
Originally Posted by nox1s
Do you know if once a keys been programmed to open/lock doors, it can be reprogrammed for another car?
I bought eBay keys for the casing, switched out the transponder/key, but not the motherboard. It starts the car fine, and unlocks it with the door handle, but I cannot for the life of me seem to program it for the buttons to work.
I bought eBay keys for the casing, switched out the transponder/key, but not the motherboard. It starts the car fine, and unlocks it with the door handle, but I cannot for the life of me seem to program it for the buttons to work.
Edit: Found it
Originally Posted by Shawnkey
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
Hope this is useful and saves you $100.
Shawn
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
- Insert the key into the ignition switch.
- Press either the lock or unlock button momentarily twice.
Hope this is useful and saves you $100.
Shawn
Joined: Dec 2010
Posts: 14
Likes: 0
From: nebraska
Re: Crossfire Keys
I just bought a new key and fob from Remotes and Keys.com. It came just like the factory origional. Pre-programmed for my car. Total cost: $139.99 plus shipping. I t works perfectly right out of the box.
Senior Member
Joined: Nov 2006
Posts: 6,590
Likes: 766
From: Orange County CA.
Re: Crossfire Keys
Each key is programedand cut for a specific VIN. I don't think any old key can be reprogrammed for a diferant vehicle eveen if you could change the actual cut key part.
Senior Member
Joined: Mar 2009
Posts: 874
Likes: 0
From: Houston, TEXAS
Re: Crossfire Keys
Originally Posted by gtrguy
I just bought a new key and fob from Remotes and Keys.com. It came just like the factory origional. Pre-programmed for my car. Total cost: $139.99 plus shipping. I t works perfectly right out of the box.
Senior Member
Joined: Oct 2008
Posts: 3,140
Likes: 83
From: Grimsby, Ontario
Senior Member
Joined: Mar 2009
Posts: 874
Likes: 0
From: Houston, TEXAS
Re: Crossfire Keys
Originally Posted by bluecoupe
Be very careful with replacement cases. Reading on this forum, if you search for it, replacement of the case is not as straightforward as you would think. It has been done, but from reading on this forum, a very delicate operation. On the forum somewhere, I remember reading a Good Post, with pictures and instructions. I will Contact you if I find it. I have just purchased a New Key from " Keys & Fobs", as I had a problem with mine, as well as it looking a bit chatty.
TerryR
Joined: Jan 2011
Posts: 4
Likes: 0
Re: Crossfire Keys
Guys I need to replace entire key set , I heard that we can find it brand-new for no more than $60 is that true?I live in L.A. Does anyone know where can. I go to grab a new key ?
Thank you In advance
B.
Thank you In advance
B.
Joined: Jul 2012
Posts: 287
Likes: 0
From: South Essex
Re: Crossfire Keys
Yes it should, do you have the instructions for programming it? I'll see if I can find them real quick.
Edit: Found it
Originally Posted by Shawnkey
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
Insert the key into the ignition switch.
Press either the lock or unlock button momentarily twice.
Turn the key in the ignition switch to the ON/RUN position within 30 seconds.
Hope this is useful and saves you $100.
Shawn
Edit: Found it
Originally Posted by Shawnkey
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.
STANDARD PROCEDURE - TRANSMITTER PROGRAMMING
The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE
Transmitter programming by the customer is done by performing the following steps:
Insert the key into the ignition switch.
Press either the lock or unlock button momentarily twice.
Turn the key in the ignition switch to the ON/RUN position within 30 seconds.
Hope this is useful and saves you $100.
Shawn
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: Crossfire Keys
Gentlemen - Start Your Engines !
For 60 bucks.. not bad for a spare backup..
Amazingkeys.com - Chrysler Key Cut and Code
well thats the cut and program fee.. cant seem to locate the key price.. but might be worth a phone call?
For 60 bucks.. not bad for a spare backup..
Amazingkeys.com - Chrysler Key Cut and Code
well thats the cut and program fee.. cant seem to locate the key price.. but might be worth a phone call?
Last edited by Mrmiata; Jul 31, 2012 at 08:15 PM.
Senior Member
Joined: Jul 2009
Posts: 6,325
Likes: 775
From: Central South Carolina
Re: Crossfire Keys
Gentlemen - Start Your Engines !
For 60 bucks.. not bad for a spare backup..
Amazingkeys.com - Chrysler Key Cut and Code
For 60 bucks.. not bad for a spare backup..
Amazingkeys.com - Chrysler Key Cut and Code
Maybe I am not reading this right? The comments below copied/pasted here:Includes up to 2 Chrysler product (Dodge, Jeep, Plymouth and Chrysler) keys cut and retrieval of your key code when available. Please add this item after you have made your key selection. This item does not include the cost of the keys nor does it include any transponder key programming that you may need.
So, what actually does this mean?
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Re: Crossfire Keys
Maybe I am not reading this right? The comments below copied/pasted here:Includes up to 2 Chrysler product (Dodge, Jeep, Plymouth and Chrysler) keys cut and retrieval of your key code when available. Please add this item after you have made your key selection. This item does not include the cost of the keys nor does it include any transponder key programming that you may need.
So, what actually does this mean?
Guess those in need could place a call and confirm... might just be fishing bait here too..
Thread
Thread Starter
Forum
Replies
Last Post
Keepmeinmind13
Troubleshooting & Technical Questions & Modifications
14
Jul 10, 2015 01:05 AM
mhajek18
TSBs and How-To Articles
1
Jun 17, 2015 01:35 PM
gtjl
Troubleshooting & Technical Questions & Modifications
4
Jun 10, 2015 02:44 PM
gobraves423
Troubleshooting & Technical Questions & Modifications
10
Jun 6, 2015 07:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)