OBD Scanner No Power
Thread Starter
Joined: Aug 2024
Posts: 8
Likes: 2
From: Florida
OBD Scanner No Power
I am having issues with my OBD scanner, have tried 4 different scanners, all of which were working, wouldn't even power on when plugged in.
Quite a bit of the electrical work is either New or completely taken out due to the previous owner, My first thought is it could be some simple mistake maybe a misplaced fuse or something of the sort.
The door locks, the wing is stuck up, and the driver's seat won't move, Could it be in relation to such? Only asking as it shows a general service warning when starting, And as of yesterday a Check Engine light.
Any and All suggestions are Much appreciated not mechanically inapt
Quite a bit of the electrical work is either New or completely taken out due to the previous owner, My first thought is it could be some simple mistake maybe a misplaced fuse or something of the sort.
The door locks, the wing is stuck up, and the driver's seat won't move, Could it be in relation to such? Only asking as it shows a general service warning when starting, And as of yesterday a Check Engine light.
Any and All suggestions are Much appreciated not mechanically inapt
Senior Member
Joined: Jul 2009
Posts: 6,355
Likes: 792
From: Central South Carolina
Re: OBD Scanner No Power
I am having issues with my OBD scanner, have tried 4 different scanners, all of which were working, wouldn't even power on when plugged in.
Quite a bit of the electrical work is either New or completely taken out due to the previous owner, My first thought is it could be some simple mistake maybe a misplaced fuse or something of the sort.
The door locks, the wing is stuck up, and the driver's seat won't move, Could it be in relation to such? Only asking as it shows a general service warning when starting, And as of yesterday a Check Engine light.
Any and All suggestions are Much appreciated not mechanically inapt
Quite a bit of the electrical work is either New or completely taken out due to the previous owner, My first thought is it could be some simple mistake maybe a misplaced fuse or something of the sort.
The door locks, the wing is stuck up, and the driver's seat won't move, Could it be in relation to such? Only asking as it shows a general service warning when starting, And as of yesterday a Check Engine light.
Any and All suggestions are Much appreciated not mechanically inapt
Download the service manual free here in the forum, and start there. Look under the electrical system and specifically where the OBD2 port gets it's hot lead from. If there is a hot at it's pin (OBD2 port) then trace the ground back through the return(s). It is a good start for your getting familiar with your car. Also, welcome to the forum! .
Thread
Thread Starter
Forum
Replies
Last Post
Xfirewhiteghost
Troubleshooting & Technical Questions & Modifications
3
Oct 12, 2019 10:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)