Clipped a curb and got a generous scrape on wheel
Clipped a curb and got a generous scrape on wheel
I know someone wrote about this previously but I got a very "nice" sized scrape on the side of my driver's side front wheel. Is it possible to file it down to make it smooth? Has anyone done it? Who will do this sort of work? Thanks for any inputs.
Re: Clipped a curb and got a generous scrape on wheel
Repairing Scratched Alloy Wheels & Rim Damage | How-to Guide
There's a link...I know there's a PDF somewhere as well...
You can do a good repair with prep/time/patience
There's a link...I know there's a PDF somewhere as well...
You can do a good repair with prep/time/patience
Re: Clipped a curb and got a generous scrape on wheel
I bought the Wurth silver and clear thru the internet. Decided not to use it and had it repaired locally back to brand new condition. I'll sell the Wurth cheap - never used.
Currently I have 2 wheels at the "Wheel Dr." getting straightened after going thru a construction zone. I read on here about how strong the factory wheels are, I disagree, it didn't take much to bend the inner lips.
James
Currently I have 2 wheels at the "Wheel Dr." getting straightened after going thru a construction zone. I read on here about how strong the factory wheels are, I disagree, it didn't take much to bend the inner lips.
James
Re: Clipped a curb and got a generous scrape on wheel
Originally Posted by garagebandking82
Repairing Scratched Alloy Wheels & Rim Damage | How-to Guide
There's a link...I know there's a PDF somewhere as well...
You can do a good repair with prep/time/patience
There's a link...I know there's a PDF somewhere as well...
You can do a good repair with prep/time/patience
That's good info. I just wish the photos show. Thanks.
Re: Clipped a curb and got a generous scrape on wheel
Originally Posted by qzomak
Depends on how bad is the damage. I believe the best way to go about is to find a reliable shop to re-finish the wheels for you. It's about 100 bucks per wheel
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)