Transmission questions
Re: Transmission questions
To the best of my knowledge:
No, and yes.
The NA should be W 5 A 330 (330 NM torque input) Output spider will have three arms. Uses six hole flex disk.
SRT should be W 5 A 580 (580 NM torque input) Output spider will have four arms. Uses eight hole flex disk.
NAG 1 is the 722.6 five speed.
NAG 2 is the 722.9 seven speed.
No, and yes.
The NA should be W 5 A 330 (330 NM torque input) Output spider will have three arms. Uses six hole flex disk.
SRT should be W 5 A 580 (580 NM torque input) Output spider will have four arms. Uses eight hole flex disk.
NAG 1 is the 722.6 five speed.
NAG 2 is the 722.9 seven speed.
Last edited by nhmercracer; 03-11-2010 at 11:09 PM.
Re: Transmission questions
Thanks for the quick reply. I didn't see where they called out the difference between the NA and SRT transmissions in the SRT service manual. Maybe I just missed it.
Do you know if MB is still making the NAG1 transmission or is it obsolete?
Do you know if MB is still making the NAG1 transmission or is it obsolete?
Thread
Thread Starter
Forum
Replies
Last Post
jimf
Troubleshooting & Technical Questions & Modifications
11
10-10-2015 10:22 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)