KN Air filters?
Re: KN Air filters?
to purchase....see link below. (you will need 2 filters)
http://www.ajusa.com/cgi-bin/knfilte...3d9b0561a6cc47
take a look at this link for past k&n discussion.
https://www.crossfireforum.org/forum...=k%26n+filters
http://www.ajusa.com/cgi-bin/knfilte...3d9b0561a6cc47
take a look at this link for past k&n discussion.
https://www.crossfireforum.org/forum...=k%26n+filters
Re: KN Air filters?
I hate to post this since I have installed K&N air filters but I wanted to get opinions of this report:
http://www.systems-engineering-associates.com/papers
http://www.systems-engineering-associates.com/papers
Re: KN Air filters?
I've had K&Ns in my Audi for two years and they made no difference to performance or gas mileage. The only benefit is that I won't ever have to buy air filters again.
That being said, I bought a pair (you do need two) for my roadster and will buy a pair for my SRT6.
Warning: Make sure you let them drain real well after cleaning and installing. Audi owners have reported that excess oil gets on the mass air flow (MAF) sensor and the car runs like crap. I'll bet our engine has a similar sensor.
That being said, I bought a pair (you do need two) for my roadster and will buy a pair for my SRT6.
Warning: Make sure you let them drain real well after cleaning and installing. Audi owners have reported that excess oil gets on the mass air flow (MAF) sensor and the car runs like crap. I'll bet our engine has a similar sensor.
Guest
Posts: n/a
Re: KN Air filters?
We have the filters for the base/limited and SRT models on our website for very competitive prices.
You will notice a better throttle reponse, and more pull up top, expecially the SRT6.
http://www.tvtdesign.com/chrysler_crossfire_and_srt_6
You will notice a better throttle reponse, and more pull up top, expecially the SRT6.
http://www.tvtdesign.com/chrysler_crossfire_and_srt_6
Thread
Thread Starter
Forum
Replies
Last Post
jimf
Troubleshooting & Technical Questions & Modifications
11
10-10-2015 10:22 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)