P0410 Error Code after Replacement - CrossfireForum - The Chrysler Crossfire and SRT6 Resource

Crossfire Roadster A place to post Roadster specific topics.

P0410 Error Code after Replacement

  #1 (permalink)  
Old 03-14-2019, 09:13 AM
Thread Starter
Join Date: Mar 2019
Location: GA
Age: 54
Posts: 21
Default P0410 Error Code after Replacement

Just purchased my 2005 Crossfire Limited Roadster. The previous owner informed me that in March he had the Secondary Air Injection Pump replaced. Now I have a check engine light on and the error code is P0410. I would bring it back to the shop but it's over two hours away. I was hoping to get some input here first thinking it was something simple like a connector or relay. I really do not want to take it to a shop. Any input would be greatly appreciated. Thanks in advance.

BTW- This warning was Yellow, not red, the first time i checked.
 
  #2 (permalink)  
Old 03-14-2019, 10:09 AM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 74
Posts: 11,351
Default Re: P0410 Error Code after Replacement

Check for burnt contacts on the air pump relay in the RCM ( located in the box next to the battery, it's the module closest to the engine.
 
  #3 (permalink)  
Old 03-14-2019, 10:17 AM
Join Date: Nov 2017
Location: Alexandria, Kentucky
Age: 80
Posts: 271
Default Re: P0410 Error Code after Replacement

ala-xfire - Very nice pictures and explanation. Thank you.

Jim
 
  #4 (permalink)  
Old 03-14-2019, 09:58 PM
Thread Starter
Join Date: Mar 2019
Location: GA
Age: 54
Posts: 21
Default Re: P0410 Error Code after Replacement

Thanks so much. I will give it a go and do an update. Can you replace an individual relay or do you have to replace the entire module?
 

Last edited by HazMatt; 03-14-2019 at 11:49 PM.
  #5 (permalink)  
Old 03-15-2019, 12:09 AM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 74
Posts: 11,351
Default Re: P0410 Error Code after Replacement

Originally Posted by HazMatt View Post
Thanks so much. I will give it a go and do an update. Can you replace an individual relay or do you have to replace the entire module?
You can, but it is much better to just send it to DJ and have him do it.
He charges around $50 for a 3 relay replacement ( engine, fuel pump & air pump ).
Send him an email at [email protected] for address and instructions.
 
  #6 (permalink)  
Old 03-15-2019, 07:37 AM
zip439's Avatar
Forum Regular
Join Date: Jul 2010
Location: SE Alabama
Posts: 579
Default Re: P0410 Error Code after Replacement

Check that 50 amp fuse.
 
  #7 (permalink)  
Old 03-15-2019, 09:09 AM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 79
Posts: 21,210
Default Re: P0410 Error Code after Replacement

We are becoming like stealerships, replace this, send it to. ——,etc.
Lets get back to basics. I cannot see these questions addressed.
Are the points burnt? If so file them clean and see if that works, then replace the burnt relay.
Are the solenoids working?
Is that blue valve working?
Are the hoses to the two valves in good shape and connected?
Is the ground wire clean?
Does the pump run and shut of within a half a minute?
Is the pump running continuously?
 
  #8 (permalink)  
Old 03-15-2019, 10:11 AM
waldig's Avatar
Senior Member
Join Date: Feb 2008
Location: VA
Posts: 4,395
Default Re: P0410 Error Code after Replacement

From a while ago..........enjoy. Woody

https://www.crossfireforum.org/forum...10-yippie.html
 
  #9 (permalink)  
Old 03-15-2019, 11:04 AM
Thread Starter
Join Date: Mar 2019
Location: GA
Age: 54
Posts: 21
Default Re: P0410 Error Code after Replacement

Thank you.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hbv2020
Audio, Video and Electronics
18
01-05-2013 07:44 PM
nate_man
Engine, Exhaust, Transmission and Differential
16
03-11-2012 10:10 PM
palexfire1
TSBs and How-To Articles
3
11-18-2011 10:23 AM
gsimonsen
General
2
04-19-2011 04:31 AM
04chryslr
Crossfire Coupe
5
07-31-2008 11:36 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Quick Reply: P0410 Error Code after Replacement


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.