Crossfire Roadster A place to post Roadster specific topics.

2007 top

Thread Tools
 
Old Dec 12, 2019 | 02:24 PM
  #1 (permalink)  
Greg6271's Avatar
Thread Starter
Joined: Dec 2019
Posts: 4
Likes: 0
From: MA
Default 2007 top

I have a 2007 Crossfire base model I have top problem the top goes up and down and locks everything seems to work fine when I go over 10 miles an hour the top beeps constantly up or down can anybody help with this problem I checked all the limit switches everything's fine the only ones I didn't look at the windshield header switches and the trunk will not open is anybody out there having the same problem please help
 
Reply
Old Dec 12, 2019 | 09:05 PM
  #2 (permalink)  
DualSportDad's Avatar
Joined: Feb 2019
Posts: 205
Likes: 6
From: Cape Coral, Fl.
Default re: 2007 top

before anything else make sure you're holding the button until the top stops moving AND you hear a beep letting you know it's reached full close or open. beyond that you'll to need to find someone that is knowledgeable about what the switch state should be for the position your top is in and the scan tools needed read the data in the power top module. the 2007 is a bit of a pain cause it uses witech1 and witech2. i think a dealer would be your best bet.
 
Reply
Old Dec 13, 2019 | 07:07 AM
  #3 (permalink)  
Greg6271's Avatar
Thread Starter
Joined: Dec 2019
Posts: 4
Likes: 0
From: MA
Default re: 2007 top

Yes thank you .for the switch at the windshield should be closed and I'm not sure how to get to that one and the other limit switches I know the functions of them I was wondering if they are any videos out there on how to get at that switch at the windshield and I do run the top till it beeps
 

Last edited by Greg6271; Dec 13, 2019 at 07:10 AM.
Reply
Old Dec 13, 2019 | 07:53 AM
  #4 (permalink)  
DualSportDad's Avatar
Joined: Feb 2019
Posts: 205
Likes: 6
From: Cape Coral, Fl.
Default re: 2007 top

The car beeps whether the top is up or down? If so I find it hard to believe that it could be the header switch.
 
Reply
Old Dec 13, 2019 | 09:08 AM
  #5 (permalink)  
Greg6271's Avatar
Thread Starter
Joined: Dec 2019
Posts: 4
Likes: 0
From: MA
Default re: 2007 top

I'm sorry I'm new to this I probably sent you two of them but here it goes again can it be a maladjusted locking stems I wish I could see them to see if they are sitting where are supposed to and if it is a problem how do you adjust them I don't see a way that they can be but that I don't know the only adjustment but I seen his on the limit switch that's on a tunnel cover it has about a 3/8 throw and the screw for adjustment is painted
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rapps
Crossfire Roadster
16
Nov 22, 2011 01:45 PM
mrmedia
Crossfire SRT6
0
Jun 27, 2010 02:28 PM
MLC2008
Crossfire Roadster
10
Nov 7, 2008 02:37 AM
cjb
Crossfire Roadster
17
Dec 27, 2007 07:19 AM
baksdak
Crossfire Coupe
32
Jun 3, 2007 03:04 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 07:47 PM.