Cable tonneau flap side wanted...
Re: Cable tonneau flap side wanted....
I don't believe these are available any longer. I replaced both of mine a number of years ago as both got hung up in the cable sleeve. My suggestion would be to disconnect the cable and take it to a shop that repairs convertible tops and see if they can make one or two for you. Another option would be a salvage yard but you may run into the same problem. If/when you are able to find a replacement be sure to use a cable lube tool and cable lube to lubricate heavily before you re-install. Good luck!
PJ
PJ
Re: Cable tonneau flap side wanted...
I just had mine pull apart at the end fitting and am trying to repair by drilling out the fitting slightly and refitting the cable with JB Weld steel reinforced epoxy. I had to scrape the nylon coating off to give the JB Weld a better grip on the stainless cable. If it broke elsewhere head to the bike shop but keep the end fittings if possible.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)