Crossfire SRT6 A place to discuss SRT-6 specific topics.

Code3 Performance to visit LET!!

Thread Tools
 
Old Oct 18, 2008 | 04:34 PM
  #21 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,607
Likes: 39
From: IN
Default Re: Code3 Performance to visit LET!!

sry, guys, my back-up didn't take my shift, so I was stuck until 3 pm...this sucks, really wanted to meet Brandon and have my tune tweeked,,,so maybe next time...
 
Reply
Old Oct 19, 2008 | 01:11 PM
  #22 (permalink)  
ImportLabSRT's Avatar
Senior Member
Joined: Aug 2008
Posts: 1,203
Likes: 3
From: Elburn, IL
Default Re: Code3 Performance to visit LET!!

It was an great day to be at the track. Im happy with my runs (between 12.22 and 12.43) all day. Best time of the day was a 12.2 @ 112 with my best trap being in a slower 12.43 @ 113 but spun the hoosiers off the line. What seemed to hurt the most is the car shifts into 4th gear about 100ft from the 1/4 and wont carry boost and the nose dibs and drops a good 10th off the time.
 
Reply
Old Oct 19, 2008 | 01:25 PM
  #23 (permalink)  
mrphotoman's Avatar
Senior Member
Joined: Feb 2008
Posts: 3,665
Likes: 5
Default Re: Code3 Performance to visit LET!!

Originally Posted by ImportLabSRT
It was an great day to be at the track. Im happy with my runs (between 12.22 and 12.43) all day. Best time of the day was a 12.2 @ 112 with my best trap being in a slower 12.43 @ 113 but spun the hoosiers off the line. What seemed to hurt the most is the car shifts into 4th gear about 100ft from the 1/4 and wont carry boost and the nose dibs and drops a good 10th off the time.
what mods do yu have?
 
Reply
Old Oct 19, 2008 | 02:00 PM
  #24 (permalink)  
ImportLabSRT's Avatar
Senior Member
Joined: Aug 2008
Posts: 1,203
Likes: 3
From: Elburn, IL
Default Re: Code3 Performance to visit LET!!

Originally Posted by mrphotoman
what mods do yu have?
LET 181 crank pulley, Needswings CAI, LET H/E, Johnson pump, LET tune and Hoosier 275/40r17 Drag Radials.
 
Reply
Old Oct 19, 2008 | 03:40 PM
  #25 (permalink)  
bikecop's Avatar
Joined: Aug 2007
Posts: 293
Likes: 0
Default Re: Code3 Performance to visit LET!!

It was really great meeting up with Brandon from Code 3. I already knew he was a cool guy, from our many calls back and forth. But to met up was cool.

Jerry and Wayne were very busy tuning cars including mine. I was running 12.40& 50's all day with 1.8ish 60fts. before the tune. After he tuned it I ran 12.3 with a 1.77 60 & 7.95 in the 1/8. Both these guys are good people and they put together a very fun event. I dont know what its going to take to get my car to run 12 flat or better may be a 178/code 3 combo
 
Reply
Old Oct 19, 2008 | 03:45 PM
  #26 (permalink)  
mrphotoman's Avatar
Senior Member
Joined: Feb 2008
Posts: 3,665
Likes: 5
Default Re: Code3 Performance to visit LET!!

it sounds like you guys had a lot of fun, congratulations on your times!
 
Reply
Old Oct 19, 2008 | 03:48 PM
  #27 (permalink)  
cruzinquick's Avatar
Senior Member
Joined: Sep 2007
Posts: 2,535
Likes: 4
From: AZ
Default Re: Code3 Performance to visit LET!!

Originally Posted by ImportLabSRT
LET 181 crank pulley, Needswings CAI, LET H/E, Johnson pump, LET tune and Hoosier 275/40r17 Drag Radials.
Was it hot? You have virtually the same mods on all motor as MD(besides nw mani's, IM tune). With good weather you should be very low 12's.
 
Reply
Old Oct 19, 2008 | 03:53 PM
  #28 (permalink)  
ImportLabSRT's Avatar
Senior Member
Joined: Aug 2008
Posts: 1,203
Likes: 3
From: Elburn, IL
Default Re: Code3 Performance to visit LET!!

Originally Posted by cruzinquick
Was it hot? You have virtually the same mods on all motor as MD(besides nw mani's, IM tune). With good weather you should be very low 12's.
No, it wasnt hot..... it was actually a perfect day for it. A lot of people seemed to be running a few tenths off their usual times. This was my first time at the track in the Crossfire so I cannot comment on that for me personally.
 
Reply
Old Oct 19, 2008 | 03:57 PM
  #29 (permalink)  
cruzinquick's Avatar
Senior Member
Joined: Sep 2007
Posts: 2,535
Likes: 4
From: AZ
Default Re: Code3 Performance to visit LET!!

Did you have any 1.7's 60' foots? Those are good times for being your first time at the track. The 60' would show if your power is down low or top end.
 
Reply
Old Oct 19, 2008 | 03:58 PM
  #30 (permalink)  
cruzinquick's Avatar
Senior Member
Joined: Sep 2007
Posts: 2,535
Likes: 4
From: AZ
Default Re: Code3 Performance to visit LET!!

Originally Posted by bikecop
. I dont know what its going to take to get my car to run 12 flat or better may be a 178/code 3 combo
I can tell you, and with no spray.
 
Reply
Old Oct 19, 2008 | 04:02 PM
  #31 (permalink)  
ImportLabSRT's Avatar
Senior Member
Joined: Aug 2008
Posts: 1,203
Likes: 3
From: Elburn, IL
Default Re: Code3 Performance to visit LET!!

Originally Posted by cruzinquick
Did you have any 1.7's 60' foots? Those are good times for being your first time at the track. The 60' would show if your power is down low or top end.
1.7 to 1.8's almost every run that the tires didnt spin. I can only get on the converter to about 2000 before the brakes let go. The open rear diff a killer too, one wheel burn outs suck.
 
Reply
Old Oct 19, 2008 | 04:08 PM
  #32 (permalink)  
cruzinquick's Avatar
Senior Member
Joined: Sep 2007
Posts: 2,535
Likes: 4
From: AZ
Default Re: Code3 Performance to visit LET!!

Originally Posted by ImportLabSRT
1.7 to 1.8's almost every run that the tires didnt spin. I can only get on the converter to about 2000 before the brakes let go. The open rear diff a killer too, one wheel burn outs suck.
Actually if you burn out long enough the second wheel locks up and begins to burn out too. Once this happens, and usually takes a few seconds after the first one starts. They stay locked for the launch. It's actually pretty good, almost like posi at launch.

On the converter, I believe it's the supercharger kicking in that hard to hold back. A tip is once you light the first bulb, then get on the brake hard and rev it up to load the converter as much as possible and it pushes you into the second beam, then hold the brake as hard as you can and be ready to let it go on the 3 yellow as they light up. You should get a great launch and 60' time which will lower your overall time. Mph is always lower on your fastest run. If not, then you are leaving a few hundredths on the launch. Be safe and have fun. Lot's of practice to have great 1/4 mile times.
 
Reply
Old Oct 19, 2008 | 04:24 PM
  #33 (permalink)  
ImportLabSRT's Avatar
Senior Member
Joined: Aug 2008
Posts: 1,203
Likes: 3
From: Elburn, IL
Default Re: Code3 Performance to visit LET!!

Originally Posted by cruzinquick
Actually if you burn out long enough the second wheel locks up and begins to burn out too. Once this happens, and usually takes a few seconds after the first one starts. They stay locked for the launch. It's actually pretty good, almost like posi at launch.

On the converter, I believe it's the supercharger kicking in that hard to hold back. A tip is once you light the first bulb, then get on the brake hard and rev it up to load the converter as much as possible and it pushes you into the second beam, then hold the brake as hard as you can and be ready to let it go on the 3 yellow as they light up. You should get a great launch and 60' time which will lower your overall time. Mph is always lower on your fastest run. If not, then you are leaving a few hundredths on the launch. Be safe and have fun. Lot's of practice to have great 1/4 mile times.
Thanks for the tips. It was a few first for me.... First time at the track in the Crossfire, First time with an automatic and first time with a RWD. I have high hopes for this car and it was a blast at the track and very consistant. I have 12-15 time slips all with in 2 tenths of a second.
 

Last edited by ImportLabSRT; Oct 19, 2008 at 06:16 PM.
Reply
Old Oct 19, 2008 | 04:57 PM
  #34 (permalink)  
cruzinquick's Avatar
Senior Member
Joined: Sep 2007
Posts: 2,535
Likes: 4
From: AZ
Default Re: Code3 Performance to visit LET!!

Awesome. Those slips will put you in the money round. I made $170 this weekend for runner up. Practice reaction times and your a lock. Most of all enjoy your car. I'm having the most fun with this car of any that I've owned.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
syfi
TSBs and How-To Articles
43
Mar 28, 2026 04:14 PM
Sweet2002
Crossfire SRT6
5
Oct 1, 2015 01:42 AM
Ralph289
Crossfire SRT6
17
Sep 21, 2015 09:34 PM
grip grip
Other Cars Etc
19
Sep 19, 2015 08:43 PM
brandoni
Crossfire SRT6
0
Sep 6, 2015 07:35 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:24 AM.