Crossfire SRT6 A place to discuss SRT-6 specific topics.

Car's back in the shop

Thread Tools
 
Old Mar 2, 2009 | 05:10 PM
  #1 (permalink)  
bigbengt67's Avatar
Thread Starter
|
Forum Regular
Joined: Feb 2006
Posts: 328
Likes: 0
From: Cincinnati, OH
Default Car's back in the shop

Well, I think my intercooler pump died last week so I took the car in for some work today. Here's what I'm getting done:

1) New IC pump
2) Door grab trim is peeling and slicing fingers
3) Lots of oil on the passenger side valve cover- I forget, is this a common problem? I think the gasket is bad.
4) Broken headlight mount tab-hopefully I get a new headlight and half my hazy headlight problems will be gone.
5) Click noise when I turn the wheels to full lock, I think it might be a tie rod or ball joint issue.

Hopefully all will get fixed under MaxCare, until then I've got to deal with a Dodge Caliber rental again...
 
Reply
Old Mar 2, 2009 | 09:18 PM
  #2 (permalink)  
antonio311's Avatar
Forum Regular
Joined: Sep 2007
Posts: 453
Likes: 0
Default Re: Car's back in the shop

I love the Dodge caliber. I almost purchased the one from the rental place after I drove it for a week.
 
Reply
Old Mar 3, 2009 | 05:44 AM
  #3 (permalink)  
cross><hair's Avatar
Forum Regular
Joined: Jan 2009
Posts: 578
Likes: 0
From: South Jersey
Default Re: Car's back in the shop

Originally Posted by antonio311
I love the Dodge caliber. I almost purchased the one from the rental place after I drove it for a week.
Really- anyone I know who has driven one said it's like a "rental car", incidentally. I've never been turned off by it's styling- I think the pseudo SUV/Crossover look to it is unique. I absolutely LOVE hatchbacks/wagons so it's a nice fit. However when I went shopping a year ago the Mazdaspeed3 won me over. However only to have the SRT-6 woe me away 12 months later.
 
Reply
Old Mar 3, 2009 | 06:05 AM
  #4 (permalink)  
SRT6nTulsa's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,280
Likes: 2
From: Albuquerque, NM
Default Re: Car's back in the shop

Originally Posted by bigbengt67
Well, I think my intercooler pump died last week so I took the car in for some work today. Here's what I'm getting done:

1) New IC pump
2) Door grab trim is peeling and slicing fingers
3) Lots of oil on the passenger side valve cover- I forget, is this a common problem? I think the gasket is bad.
4) Broken headlight mount tab-hopefully I get a new headlight and half my hazy headlight problems will be gone.
5) Click noise when I turn the wheels to full lock, I think it might be a tie rod or ball joint issue.

Hopefully all will get fixed under MaxCare, until then I've got to deal with a Dodge Caliber rental again...
That stuff should be covered. I don't know if it is a common problem , but I had both valve cover gaskets replaced a couple of months ago under factory warranty.
 
Reply
Old Mar 3, 2009 | 04:30 PM
  #5 (permalink)  
bigbengt67's Avatar
Thread Starter
|
Forum Regular
Joined: Feb 2006
Posts: 328
Likes: 0
From: Cincinnati, OH
Default Re: Car's back in the shop

Well, heard back from the dealer today and don't have many positive things to say:

1) Can't replicate the IC failure... they say I have a code for an MAF sensor, but I don't think that is it. Is there a way to simply test the IC pump?

2)MaxCare won't cover interior trim. Thought this might be the case.

3) Valve cover is leaking, new gasket ordered.

4) MaxCare won't cover headlights. I can understand the fogging/ hazing type of claim, but a broken mount should be covered!

5) Can't replicate the steering click...

I think I am going to have to go over and sit with the tech (who by the way owns an SRT'6) and hold their hands on issues 1 and 5.
 
Reply
Old Mar 7, 2009 | 07:01 PM
  #6 (permalink)  
bigbengt67's Avatar
Thread Starter
|
Forum Regular
Joined: Feb 2006
Posts: 328
Likes: 0
From: Cincinnati, OH
Default Re: Car's back in the shop

After trying to replace the intake air temp sensor, and getting a special Chrysler technician to look at my car the dealer has concluded that.....



Wait for it...




The IC pump is out. If only they would have listened to me in the first place they could have saved themselves 5 days of troubleshooting. Now I have to wait until Tuesday for the part to come in. This forum has made me too smart for the dealer's own good.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rayth
Parts/Accessories for sale - Archive
41
Jul 31, 2019 04:02 PM
rayth
Other Cars Etc
11
Jul 29, 2019 07:59 AM
rmcdaniel12
All Crossfires
6
Jul 1, 2015 12:49 PM
Fla_Xfire_SRT
Engine, Exhaust, Transmission and Differential
10
Jun 29, 2015 06:51 PM
Red_Crossfire_1
General
5
Jun 1, 2015 02:30 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 05:06 AM.