-------------------------------updated 3/6/11 ,, 10:30 pm jim-----------------------------

Deposit made = Dm
1) Buggin D.M.
2) 32Krazy! D.M.-----------steve rivet
3) ckovach D.M.
4) MrSix D.M.
5) oledoc2u D.M.-------------William L. (Doc) Holliday
6) oledoc2u D.M.--------------William L. (Doc) Holliday
7) importlabsrt D.M.
8) Waldig D.M.
9) Squirrel Crusher D.M.
10) Tom2112 D.M.
11) scsponger31 D.M.
12) tri_zombie D.M.
13) brian_omeara07 D.M.
14) velociabstract D.M.
15) amx1397 D.M. ----------------- Jim barnes
16) daithi2 D.M.---------------------Harley Dooley

17) PA/XFIRE D.M.
18) KrzyFast D.M.
19) BigKid *D.M.
20) texas t D.M.
21) Sik Srt-6 D.M.
22) Dementors D.M.
23) Coyote D.M. ----------------William C. Epperly
24) Beaner D.M.----------------Bryan Lambert

 

thanks Jim....

 

Originally Posted by amx1397
updated 3/6/11 8:53 pm jim

Deposit made = Dm
1) Buggin D.M.
2) 32Krazy! D.M.-----------steve rivet
3) ckovach D.M.
4) MrSix D.M.
5) oledoc2u D.M.-------------William L. (Doc) Holliday
6) oledoc2u D.M.--------------William L. (Doc) Holliday
7) importlabsrt D.M.
8) Waldig D.M.
9) Squirrel Crusher D.M.
10) Tom2112 D.M.
11) scsponger31 D.M.
12) tri_zombie D.M.
13) brian_omeara07 D.M.
14) velociabstract D.M.
15) amx1397 D.M. ----------------- Jim barnes
16) daithi2 D.M.--------Harley Dooley
17) PA/XFIRE D.M.
18) KrzyFast D.M.
19) BigKid *D.M.
20) texas t D.M.
21) Sik Srt-6 D.M.
22) Dementors D.M.
23) Coyote D.M. ----------------William C. Epperly
24) Beaner D.M.

 

My name shouldn't be hard to match up. I think I'm the only Tom on the list.

 

Thanks for the help JIM L.S.

 

I assume each of you have your receipt,, or I'm sure Devin at Unitrax has it , I am putting the list together.
-------------------------------updated 3/9/11 ,, 3:13 pm EST,,jim-----------------------------

Deposit made = Dm
1) Buggin D.M.-----------------A.B.
2) 32Krazy! D.M.------------------S.R
3) ckovach D.M.------------------C.K.
4) MrSix D.M.
5) oledoc2u D.M.-----------------W.H.
6) oledoc2u D.M.-----------------W.H.
7) importlabsrt D.M.
8) Waldig D.M.-------------------G.W.
9) Squirrel Crusher D.M.--------D.B.
10) Tom2112 D.M.-------------T.D.
11) scsponger31 D.M.
12) tri_zombie D.M.
13) brian_omeara07 D.M.-------B.O.
14) velociabstract D.M.--------L.H.
15) amx1397 D.M. -------------J.B.
16) daithi2 D.M.---------------H.D.
17) PA/XFIRE D.M.---------------L.S.
18) KrzyFast D.M. -------------P.M.
19) BigKid *D.M. ---------------J.R.
20) texas t D.M. ---------------D.S.
21) Sik Srt-6 D.M.
22) Dementors D.M.------------J.B.
23) Coyote D.M. --------------W. E.
24) Beaner D.M.------------------B.L.
25) wedge D.M.------------------S.B.
26) mile R.-----------------------M.R.
27) rcompart---------------------R.C.

 

------------------------------updated 3/9/11 ..7:19 am CST Bryan-----------------------------

Deposit made = Dm
1) Buggin D.M.
2) 32Krazy! D.M.-----------steve rivet
3) ckovach D.M.
4) MrSix D.M.
5) oledoc2u D.M.-------------William L. (Doc) Holliday
6) oledoc2u D.M.--------------William L. (Doc) Holliday
7) importlabsrt D.M.------------------Bryan Tracy
8) Waldig D.M.
9) Squirrel Crusher D.M.
10) Tom2112 D.M.------------------Tom
11) scsponger31 D.M.
12) tri_zombie D.M.
13) brian_omeara07 D.M.
14) velociabstract D.M.
15) amx1397 D.M. ----------------- Jim barnes
16) daithi2 D.M.---------------------Harley Dooley
17) PA/XFIRE D.M.
18) KrzyFast D.M.
19) BigKid *D.M.
20) texas t D.M.
21) Sik Srt-6 D.M.
22) Dementors D.M.
23) Coyote D.M. ----------------William C. Epperly
24) Beaner D.M.----------------Bryan Lambert

 

if you guys would like you can PM me your # and name and i will post it on one update revising it on each new page ,we already have over 600 post,, a lot being copy and paste, thanks jim

 

Sounds good...PM a mod (~cough~ Gary) and have them clean up the unnecessary posts.

 

Guess Jim missed my post asking for names also... lol

Anyways, CHECK THE FIRST POST.

I am down to 5 names unmatched. I prefer to not post the names out here, so I'm leaving initials only for everyone. Also, I know we had a couple people drop off. I'll have to skim the 600 posts to figure that out I guess. Def could use a mod to clean up this bad boy...

 

thanks buggin,, i was and am doing the same thing, just helping anyway i can. i did see your post but didn't realize you were correcting post 1, i though you were sending me the list for me to upgrade it, oh post 1 i never go there but will now, you do post 1 and i will do the last page post then we will be sure to connect with everyone thanks again,, we all thank you without you this would have never happened, (the long wait,I mean) LOL had to do it allen,, you know i'm messing with you,, we all owe you for this mod. this will really help those of us that push our cars and as for me,, to change to a e55 rear the cost is 4 times as much as this, so i really thank you ,,, jim

 

just have devin ship ALL the diffs to me and ill make sure everyone gets one!

 

one what ? one dollar... lol jim

 

Are you gonna install them all for us, Steve? LOL

 

im strictly transportation!

 

This was posted on a SRT-8 forum where they have a similar group buy.

Les

3/18/11: I am Dana from AUTOTECH Driveline, the manufacturer of Wavetrac Differentials. Autotech has been in business since 1983, specializing in high performance driveline parts since 1986. I am posting here to help Eddie at Southern Hot Rod get information about our new Cherokee SRT8 rear diff to everyone, as we are experiencing delays due to extremely heavy workloads in the plant.
First, we had longer than expected material supply delays to start the job. Thankfully, for this job, we finally got the required material and put that headache behind us.
We are fortunate that Wavetrac sales are growing at a tremendous pace – we think it’s in no small part because we make a well-designed product that is very high quality, right here in the USA. The downside of becoming so popular so quickly is that demand for Wavetrac has outpaced our current capacity to make them. We will not sacrifice quality to close the gap, so we are doing our best to add capacity however we can.
We appreciate your business and thank you for your patience on this project. Please understand that we will do our best to get the Wavetrac diffs to our customers as quickly as possible without losing sight of why they have become so popular – a great diff that you can count on.
Here is the most current information on the Wavetrac differential project for WK SRT8:
There are two main components that are the issues here: housings and side gears.
The housings are made in two pieces. One half has returned from black oxide finishing and will be hard turning on the next available machine. The other half has been heat treated and will join the first half on the hard turning queue late next week.
We have two dedicated hard turning work cells (4 machines total) and there are currently about 4-5 jobs ahead of the WK diffs. This means that the housings for the new diff should be ready sometime in the week of April 11th .
The side gears are the next topic. Side gears are currently being made and are expected to be completed during the week of April 18th. We are working on getting that improved.
Once the side gears and housings are completed and are in hand at our assembly area, the diffs will be built up and packaged for shipment to Southern Hotrod.
We will do our best to improve this schedule. I will post an update here next Friday March 25th.
Thank you for taking the time to read this.
Dana

 

So maybe we are job #1 of the "4 or 5 jobs ahead of the WK diffs"....

It looks like things are moving along.....

 

can you link me to the group buy? i would like to know if they started before or after us and how many deposits they have secured

 

Link to the first page of the thread.

Les

Wavetrac Differential Ready!!! - .:SRTConnection:.

 

. i got a call from Dana, we are in front of the srt8 jeep group, HREAT for us,,but we are in the middle of some ford 9" rears that Dana is waiting on 1/2 of the center section,,, as i said before june is a good time to expect your diff., or if we get luckly, early May,iis in sight,, well i am to call Dana at the end of next week for a up date,, as of right now by tax time April 18 (this year) our housing and side gears will be made and started to be put together I was told today that by Dana.

I did get to read that post and ask Dana where we stand as to the jeep group he told me we are in front of them, but a bigger job is the ford 9" and he has put us in the middle of the ford project,( because of the two halfs of the rear for them ) jim