newest engine mod!!
Senior Member
Joined: Mar 2008
Posts: 4,535
Likes: 3
From: Houston in my blood, and under my tires...
Re: newest engine mod!!
Originally Posted by grip grip
The 82mm is the stock Hemi TB on the Chryslers. The 85mm is an upgrade for them, but the 90mm is when they go full tilt.
I'd heard the MB guys were running the Hemi TB's, not which car was running what. Sorry.
I'd heard the MB guys were running the Hemi TB's, not which car was running what. Sorry.
Seems like a next step in the power process, either that or running two OEM SRT throttle bodies like woody does.
Also, side note to earlier comment. Talked to Bruce tonight about Killer Chiller...definitely going to be interesting....if the A/C can stay on at WOT.
Senior Member
Joined: Mar 2008
Posts: 4,535
Likes: 3
From: Houston in my blood, and under my tires...
Re: newest engine mod!!
Originally Posted by 32krazy!
a/c shuts off at wot matt. and i know a certain slk55 that has a 90mm t/b on it!!
I heard about the SLK55 you are talking about, talked to Rob while on his way to Chicago yesterday.
Last edited by ZAHANMA; Mar 30, 2012 at 11:07 PM.
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 17
From: Murfreesboro, TN
Re: newest engine mod!!
Originally Posted by tuningtechnician
What is everyone so excited about!
There are some cutting edge people on this forum which makes it better for everyone!
Keep up the good work guys!
There are some cutting edge people on this forum which makes it better for everyone!
Keep up the good work guys!
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Re: newest engine mod!!
final fuel rail and new 550 cc injectors installed. craftmanship is amazing and the fit is great. new tunes are coming along nicely. so far a stft of 2% and ltft is .78%. hopefully i can get to the track next sat and get some real time data for everyone. water pump pulley is enroute and then it will be time to stack some pulleys!
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 17
From: Murfreesboro, TN
Re: newest engine mod!!
Originally Posted by 32krazy!
final fuel rail and new 550 cc injectors installed. craftmanship is amazing and the fit is great. new tunes are coming along nicely. so far a stft of 2% and ltft is .78%. hopefully i can get to the track next sat and get some real time data for everyone. water pump pulley is enroute and then it will be time to stack some pulleys!
Senior Member
Joined: Mar 2008
Posts: 4,535
Likes: 3
From: Houston in my blood, and under my tires...
Re: newest engine mod!!
Originally Posted by 32krazy!
final fuel rail and new 550 cc injectors installed. craftmanship is amazing and the fit is great. new tunes are coming along nicely. so far a stft of 2% and ltft is .78%. hopefully i can get to the track next sat and get some real time data for everyone. water pump pulley is enroute and then it will be time to stack some pulleys!
Looking forward to hearing back from the track. Looks like it is time for you and/or Anthony to invest in a GoPro or two. So you can record what I'm sure will be record runs.
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 17
From: Murfreesboro, TN
Re: newest engine mod!!
Originally Posted by ZAHANMA
2% ? What happened to the 1% from yesterday? Haha, just kidding.
Looking forward to hearing back from the track. Looks like it is time for you and/or Anthony to invest in a GoPro or two. So you can record what I'm sure will be record runs.
Looking forward to hearing back from the track. Looks like it is time for you and/or Anthony to invest in a GoPro or two. So you can record what I'm sure will be record runs.
Senior Member
Joined: Mar 2008
Posts: 4,535
Likes: 3
From: Houston in my blood, and under my tires...
Re: newest engine mod!!
Originally Posted by JHM2K
He has one of those too... If only I had Steve money... and if only Steve had Anthony money.
I went out to do a 30 minute job on my car this weekend and now it is going to cost me three days, a $200 part, and a pain in my ***...just because I had to take care of it before a reasonable hour in the morning, and can't read correctly. E12 is not the same as E10...
Senior Member
Joined: Mar 2011
Posts: 3,906
Likes: 15
From: TN
Re: newest engine mod!!
Originally Posted by tuningtechnician
What is everyone so excited about!
There are some cutting edge people on this forum which makes it better for everyone!
Keep up the good work guys!
There are some cutting edge people on this forum which makes it better for everyone!
Keep up the good work guys!
On a serious note, when this guy posts, listen.
Senior Member
Joined: Jan 2012
Posts: 1,098
Likes: 0
From: SouthTX
Re: newest engine mod!!
Originally Posted by grip grip
On a serious note, when this guy posts, listen.
can we at least see a pic that JHM2K has? Can't wait, I need to start planning for this mod!
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 23
From: Chicago, IL
Re: newest engine mod!!
Originally Posted by JHM2K
Originally Posted by grip grip
If I had Steve's money, I'd burn mine.
If I had John's wife, I'd ....., never mind.
If I had John's wife, I'd ....., never mind.
Senior Member
Joined: Mar 2008
Posts: 4,535
Likes: 3
From: Houston in my blood, and under my tires...
Re: newest engine mod!!
Originally Posted by oledoc2u
truckdriver.... fuel rail photos please...that is a must mod.... Not interested in the other mods.....yet...lol...
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Re: newest engine mod!!
can you still run a fuel pressure sensor for the Zietronix with the new fuel rail?? I see that the crossover uses the schrader valve location where my sensor is located now....
Senior Member
Joined: Mar 2011
Posts: 3,906
Likes: 15
From: TN
Re: newest engine mod!!
Originally Posted by MikeR
can you still run a fuel pressure sensor for the Zietronix with the new fuel rail?? I see that the crossover uses the schrader valve location where my sensor is located now....
